Bøker utgitt av Chemical Publishing Co Inc.,U.S.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - 1. Introduction - 2. Adhesives - 3. Cement and Related Products - 4. Cosmetics and Drugs - 5. Emulsions - 6. Foods and Beverages - 7. Inks - 8. Metals and Metal Cleaners - 9. Paints and Lacquers - 10. Paper - 11. Polish - 12. Pyrotechnics - 13. Rubber, Plastics, Waxes - 14. Soaps and Cleaners - 15. Textile Specialties - 16. Miscellaneous - Appendix - Tables - Chemicals and Supplies - Sellers of Chemicals and Supplies - Supplementary List of Chemicals and Suppliers - Index - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend conslderable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. Chemists both experienced and beginner, continually refer to them. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - PREFACE TO VOLUME VIII - ABBREVIATIONS - I. INTRODUCTION - II. ADHESIVES - III. COSMETICS - IV. DRUG PiWDUCTS - V. EMULSIONS AND DISPERSIONS - VI. FARM AND GARDEN PREPARATIONS - VII. FOOD PRODUCTS - VIII. INK AND ALLIED PRODUCTS - IX. INSECTICIDES, FUNGICIDES AND WEED KILLERS - X. LEATHER TREATING PREPARATIONS - XI. LUBRICANTS AND OILS - XII. CONSTRUCTION MATERIALS - XIII. METALS AND THEIR TREATMENT - XIV. PAINT, VARNISH, LACQUER AND OTHER COATINGS - XV. PAPER - XVI. PHOTOGRAPHY - XVII. PLASTICS, RUBBER, RESINS AND WAXES - XVIII. POLISHES - XIX. PYROTECHNICS AND EXPLOSIVES - XXI. TEXTILES - XXII. MISCELLANEOUS - REFERENCES - TRADE NAME CHEMICALS - INDEX - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend considerable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort. Manufacturers and sellers of chemicals will find, In these formulae, new uses for their products. Non-chemical executives, professional men, and Interested laymen will make through this volume a "speaking acquaintance" with products which they may be using, trying or selling. It often happens that two Individuals using the same Ingredients in the same formula get different results. This may be due to slight deviations in the raw materials or unfamiliarity with the intricacies of a new technique. Accordingly, repeated experiments may be necessary to get the best results. Although many of the formulas given are being used commercially, many have been taken from the literature and may be subject to various errors and omissions. This should be taken into consideration. Wherever possible, it is advisable to consult with other chemists or technical workers regarding commercial production.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. Chemists both experienced and beginner, continually refer to them. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - PREFACE TO VOLUME IX - ABBREVIATIONS - I. INTRODUCTION - II. ADHESIVES - III. COSMETICS AND DRUGS - IV. CERAMICS, GLASS, AND CEMENT - V. COLLOIDS - VI. FARM AND GARDEN PRODUCTS - VII. FOOD - VIII. INK AND MARKING COMPOUNDS - IX. INSECTICIDES, FUNGICIDES, AND WEED KILLERS - X. LEATHER, SKINS, AND FURS - XI. LUBRICANTS AND OILS - XII. METALS AND THEIR TREATMENT - XIII. PAINT, VARNISH, LACQUER, AND OTHER COATINGS - XIV. PAPER - XV. PHOTOGRAPHY- XVI. POLISHES - XVII. PYROTECHNICS AND EXPLOSIVES - XVIII. RUBBER, RESINS, PLASTICS, AND WAXES - XIX. SOAPS AND CLEANERS - XX. TEXTILES - XXI. MISCELLANEOUS - TABLES - REFERENCES AND ACKNOWLEDGMENTS - TRADE-MARK CHEMICALS - INDEX - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend considerable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort. Manufacturers and sellers of chemicals will find, In these formulae, new uses for their products. Non-chemical executives, professional men, and Interested laymen will make through this volume a "speaking acquaintance" with products which they may be using, trying or selling. It often happens that two Individuals using the same Ingredients in the same formula get different results. This may be due to slight deviations in the raw materials or unfamiliarity with the intricacies of a new technique. Accordingly, repeated experiments may be necessary to get the best results. Although many of the formulas given are being used commercially, many have been taken from the literature and may be subject to various errors and omissions. This should be taken into consideration. Wherever possible, it is advisable to consult with other chemists or technical workers regarding commercial production.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. Chemists both experienced and beginner, continually refer to them. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - PREFACE - PREFACE TO VOLUME VII - ABBREVIATIONS - I. INTRODUCTION - II. ADHESIVES - III. FLAVORS AND BEVERAGES - IV. COSMETIC AND DRUG PRODUCTS - V. EMULSIONS AND COLLOIDS - VI. FARM AND GARDEN SPECIALTIES - VII. FOOD PRODUCTS - VIII. INKS AND MARKING SUBSTANCES - IX. SKINS-LEATHER AND FUR - X. LUBRICANTS AND OILS - XI. MATERIALS OF CONSTRUCTION - XII. METALS AND ALLOYS - XIII. PAINT, VARNISH, LACQUER AND OTHER COATINGS - XIV. PAPER - XV. PHOTOGRAPHY - XVI. POLISHES - XVII. PYROTECHNICS AND EXPLOSIVES - XVIII. PLASTICS, RESINS, RUBBER, WAX - XIX. SOAP AND CLEANERS - XX. TEXTILES AND FIBERS - XXI. MISCELLANEOUS - TABLES - REFERENCES AND ACKNOWLEDGMENTS - TRADE NAME CHEMICALS - INDEX - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend considerable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort. Manufacturers and sellers of chemicals will find, In these formulae, new uses for their products. Non-chemical executives, professional men, and Interested laymen will make through this volume a "speaking acquaintance" with products which they may be using, trying or selling. It often happens that two Individuals using the same Ingredients in the same formula get different results. This may be due to slight deviations in the raw materials or unfamiliarity with the intricacies of a new technique. Accordingly, repeated experiments may be necessary to get the best results. Although many of the formulas given are being used commercially, many have been taken from the literature and may be subject to various errors and omissions. This should be taken into consideration. Wherever possible, it is advisable to consult with other chemists or technical workers regarding commercial production.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. Chemists both experienced and beginner, continually refer to them. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - PREFACE - PREFACE TO VOLUME VI - ABBREVIATIONS - I. INTRODUCTION - II. ADHESIVES - III. BEVERAGES - IV. COSMETICS AND DRUGS - V. EMULSIONS - VI. FARM AND GARDEN SPECIALTIES - VII. FOOD PRODUCTS - VIII. HIDES, LEATHER AND FUR - IX. INKS AND MARKING MATERIALS - X. LUBRICANTS AND OILS - XI. MATERIALS OF CONSTRUCTION - XII. METALS, ALLOYS AND THEIR TREATMENT - XIII. PAINT, VARNISH, LACQUER AND OTHER COATINGS - XIV. PAPER - XV. PHOTOGRAPHY - XVII. PYROTECHNICS AND EXPLOSIVES - XVIII. RUBBER, RESINS, PLASTICS AND WAXES - XIX. SOAPS AND CLEANERS - XX. TEXTILES AND FIBERS - XXII. SUBSTITUTES - TABLES - REFERENCES AND ACKNOWLEDGMENTS - TRADE NAME CHEMICALS - INDEX - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend considerable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort. Manufacturers and sellers of chemicals will find, In these formulae, new uses for their products. Non-chemical executives, professional men, and Interested laymen will make through this volume a "speaking acquaintance" with products which they may be using, trying or selling. It often happens that two Individuals using the same Ingredients in the same formula get different results. This may be due to slight deviations in the raw materials or unfamiliarity with the intricacies of a new technique. Accordingly, repeated experiments may be necessary to get the best results. Although many of the formulas given are being used commercially, many have been taken from the literature and may be subject to various errors and omissions. This should be taken into consideration. Wherever possible, it is advisable to consult with other chemists or technical workers regarding commercial production.

There is hardly a technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - I. Introduction - II. Adhesives - III. Beverages and Food - IV. Cosmetics - V. Coatings - VI. Detergents and Disinfectants - VII. Drugs - VIII. Polishes, Abrasives - IX. Miscellaneous - Appendix - Trademark Chemicals - Trademark Chemicals Suppliers - Index - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend conslderable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - 1. Introduction - 2. Adhesives - 3. Cement and Related Products - 4. Coatings - 5. Cosmetics and Drugs - 6. Detergents - 7. Emulsions - 8. Farm and Garden Formulations - 9. Foods and Beverages - 10. Inks - 11. Leather - 12. Lubricants - 13. Metals - 14. Paper - 15. Polish - 16. Pyrotechnic - 17. Rubber, Plastics, Waxes - 18. Textile Specialties - 19. Miscellaneous - Appendix - Tables - Federal Laws Regulating Foods, Drugs, Cosmetics - Trademark Chemicals-Where to Buy Them - Chemicals (Trademark) - List of Suppliers - Index - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend conslderable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. Chemists both experienced and beginner, continually refer to them. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - INTRODUCTION - ADHESIVES - TABLE OF CONTENTS - BEVERAGES, LIQUORS, FLAVORS - COSMETICS AND DRUGS - EMULSIONS - FARM AND GARDEN SPECIALTIES - FOOD PRODUCTS - INKS - LEATHER, SKINS, FURS - LUBRICANTS, OILS, FATS - MATERIALS OF CONSTRUCTION - PAINTS, VARNISHES, LACQUERS, ETC. - PAPER - PHOTOGRAPHY - PLATING - POLISHES AND ABRASIVES - PYROTECHNICS - RUBBER, RESINS, PLASTICS, WAXES - SOAP, CLEANSERS - TEXTILES, FIBERS - MISCELLANEOUS - REFERENCES & ACKNOWLEDGMENTS - TRADE NAMED CHEMICALS AND SOURCES OF SUPPLY - SUPPLIERS OF TRADE NAME CHEMICALS - WHERE TO BUY CHEMICALS - WHERE TO BUY SPECIALTY RAW MATERIALS OUTSIDE THE UNITED STATES - INDEX - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend considerable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort. Manufacturers and sellers of chemicals will find, In these formulae, new uses for their products. Non-chemical executives, professional men, and Interested laymen will make through this volume a "speaking acquaintance" with products which they may be using, trying or selling. It often happens that two Individuals using the same Ingredients in the same formula get different results. This may be due to slight deviations in the raw materials or unfamiliarity with the intricacies of a new technique. Accordingly, repeated experiments may be necessary to get the best results. Although many of the formulas given are being used commercially, many have been taken from the literature and may be subject to various errors and omissions. This should be taken into consideration. Wherever possible, it is advisable to consult with other chemists or technical workers regarding commercial production.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. Chemists both experienced and beginner, continually refer to them. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend considerable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort. Manufacturers and sellers of chemicals will find, In these formulae, new uses for their products. Non-chemical executives, professional men, and Interested laymen will make through this volume a "speaking acquaintance" with products which they may be using, trying or selling. It often happens that two Individuals using the same Ingredients in the same formula get different results. This may be due to slight deviations in the raw materials or unfamiliarity with the intricacies of a new technique. Accordingly, repeated experiments may be necessary to get the best results. Although many of the formulas given are being used commercially, many have been taken from the literature and may be subject to various errors and omissions. This should be taken into consideration. Wherever possible, it is advisable to consult with other chemists or technical workers regarding commercial production. - CONTENTS - ADDENDA, ALCOHOLIC LIQUORS - ADHESIVES - AGRICULTURAL SPECIALTIES - ALLOYS - ANIMAL PREPARATIONS - BEVERAGES AND FLAVORS - FOOD PRODUCTS - CLEANERS, SOAPS - BLEACHING, COLORING, DYEING - COSMETICS - DECOLORIZING, DEODORIZING, DISINFECTING - EMULSIONS - ETCHING, ENGRAVING, LITHOGRAPHING - EXPLOSIVES, PYROTEcHNICS, MATCHES - FIRE PROOFING, FIRE EXTINGUISHING - FLUXES AND SOLDERS; WELDING - FUELS - GLASS, CERAMICS, ENAMELS - INK, CARBON PAPER, DUPLICATORS, CRAYONS, ETC - INSECT, RODENT AND WEED DESTROYERS - INSULATION, ELECTRICAL SPECIALTIES - LACQUERS, PAINTS, VARNISHES, STAINS - LEATHER, HIDES, SKINS, FURS - CEMENT, CONCRETE, STONE

There is hardly a technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - I. Introduction - II. Adhesives - III. Beverages and Foods - IV. Cosmetics - V. Coatings - VI. Detergents - VII. Drugs - VIII. Metal Treatments - IX. Polishes - X. Elastomers, Polymers and Resins - XI. Miscellaneous - Appendix - Index - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend conslderable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. Chemists both experienced and beginner, continually refer to them. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - PREFACE TO VOLUME X - ABBREVIATIONS - I. INTRODUCTION - II. ADHESIVES - III. COSMETICS AND DRUGS - IV. EMULSIONS AND OTHER COLLOIDS - V. FARM AND GARDEN SPECIALTIES - VI. FOOD PRODUCTS - VII. INK AND MARKING COMPOUNDS - VIII. INSECTICIDES, FUNGICIDES, AND WEED KILLERS - IX LEATHER - X. LUBRICANTS AND OILS - XI. MATERIALS OF CONSTRUCTION - XII. METALS AND THEIR TREATMENT - XIII. PAINT, VARNISH, AND LACQUER - XIV. PAPER - XV. PHOTOGRAPHY - XVI. POLISHES - XVII. PYROTECHNICS AND EXPLOSIVES - XVIII. RUBBER, RESINS, PLASTICS, AND WAXES - XIX. SOAPS AND DETERGENTS - XX. TEXTILES - XXI. MISCELLANEOUS - XXII. APPENDIX - TABLES - References and Acknowledgments - Trade-Mark Chemicals - Index - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend considerable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort. Manufacturers and sellers of chemicals will find, In these formulae, new uses for their products. Non-chemical executives, professional men, and Interested laymen will make through this volume a "speaking acquaintance" with products which they may be using, trying or selling. It often happens that two Individuals using the same Ingredients in the same formula get different results. This may be due to slight deviations in the raw materials or unfamiliarity with the intricacies of a new technique. Accordingly, repeated experiments may be necessary to get the best results. Although many of the formulas given are being used commercially, many have been taken from the literature and may be subject to various errors and omissions. This should be taken into consideration. Wherever possible, it is advisable to consult with other chemists or technical workers regarding commercial production.

There is hardly any technical library in the world in which the volumes of the Chemical Formulary (Volumes 1-34) do not occupy a prominent place. It does not duplicate any of the formulas included in previous volumes, but lists a wide array of modern and salable products from all branches of the chemical industries. An excellent reference for formulation problems. - CONTENTS - 1. Introduction - 2. Adhesives - 3. Ceramics and Glass - 4. Cosmetics and Drugs - 5. Disinfectants and Deodorants - 6. Emulsions - 7. Farm and Garden Specialties - 8. Food Products - 9. Inks and Carbon Paper - 10. Lubricants - 11. Metals - 12. Paint and Varnish - Appendix - Tables - Trademark Chemicals - Chemicals and Supplies - Sellers of Chemicals and Supplies - Index - PREFACE - Chemistry, as taught in our schools and colleges, concerns chiefly synthesis, analysis, and engineering-and properly so. It is part of the right foundation for the education of the chemist. Many a chemist entering an Industry soon finds that most of the products manufactured by his concern are not synthetic or definite complex compounds, but are mixtures, blends, or highly complex compounds of which he knows little or nothing. The literature in this field, if any, may be meager, scattered, or obsolete. Even chemists with years of experience In one or more Industries spend conslderable time and effort in acquainting themselves with any new field which they may enter. Consulting chemists similarly have to solve problems brought to them from industries foreign to them. There was a definite need for an up-to-date compilation of formulae for chemical compounding and treatment. Since the fields to be covered are many and varied, an editorial board of chemists and engineers engaged in many industries was formed. Many publications, laboratories, manufacturing firms, and Individuals have been consulted to obtain the latest and best information. It is felt that the formulas given in this volume will save chemists and allied workers much time and effort.

PREFACE - Any new book, certainly one dealing with technical matters, ought to submit something akin to a "certificate of necessity." While "necessity" is highly subjective, and capable of many shades of meaning, the plain fact of this case is that no concise dictionary of metallurgical terms, adapted to American needs, has hitherto been available. And so, if the need but be granted, the author may be permitted to hope that this volume, in greater or lesser measure, fills the void. Not that perfection is expected-the ideal may not even be prayed for in this all-too-imperfect world. Indeed, I realize that this book must inevitably contain at least a normal quota of error-sins of omission and commission both. For such, ignorance and/or carelessness must take full responsibility; in the interest of future editions, I shall be grateful for such corrections as may appear justified to the reader. No defense can be made, nor is any intended, for positive errors of commission. In a volume of this type, however, omissions may frequently reflect differing opinions as to what ought to be included. Probably no two students of metallurgy would quite agree on the scope of material to be presented. The problem here has been further complicated by a desire to serve, in this volume, lay workers at the bench and behind the torch no less than technologists with university training. As a consequence of this desire, many words and phrases in sciences peripheral to metallurgy have been included; setting a proper course has frequently been most difficult, threatened at once by the Scylla of incompleteness and the Charybdis of undue bulk. In its final form, this dictionary represents one man's effort at intelligent compromise. By its very nature, a dictionary can present little of new content. So many sources of information have found reflection in this volume that I am prevented from adequately acknowledging them; wherever possible, in fact, I have checked one source against another. Such metallurgical "demi-bibles" as Metals Handbook, Engineering Alloys (by Woldman and Dornblatt), and The Making, Shaping and Treating of Steel (by Camp and Francis) have served extensively as guides, and the reader is urged to refer to them and their technical congeners for amplification wherever this dictionary proves inadequate. The remarkably inclusive Engineering Alloys is particularly recommended for its listing and description of thousands of alloys which have not seemed important enough for description in this dictionary. There is only one exception to the generalization that nothing new has been presented. In the realm of the rare metals, where some of the published data are fragmentary, and some erroneous, I have drawn directly on my own specialized experience, and have included some amount of data hitherto un-blackened by printers' ink.

Contents - Introduction - History of the Cement Industry - Raw Materials - Proportioning Raw Materials - Preparing the Raw Mix - Fuels - Clinkering - Power - Grinding the Clinker - Storing, Packing, Loading, Shipping - Plant Design - Experimental Engineering - The Nature of Cement - Analyses and Tests - Uniformity - The Nonaqueous Liquid Process - The Counter-Cyclone Clinkerer - Research in Science and in Engineering - Concrete Materials - Proportioning Materials for Concrete - Concrete Technology - Some Concrete Accomplishments - The Iris Color Process - Miscellany - Index - INTRODUCTION - Select some raw materials, proportion them, grind, heat, cool, and grind again. Reduced to simplest terms, this is the process for manufacturing portland cement. Mixing the cement, thus produced, with aggregates and water results in mortar or concrete, to obtain which cement is manufactured. What raw materials should be selected? How are they proportioned? How finely are they ground? To what temperature are they heated? The attempt is made to answer these and many other somewhat similar questions, on the basis of the information now available in the industry. The acquisition of this information has resulted from the manufacture of portland cement for well over a century, from research, and from numerous trial and error procedures. This is a practical text and reference book. It is written for persons, technical and non-technical, inside and outside the cement and concrete industries, and in fact for everyone sufficiently interested in cement to reach for a book on the subject. Theoretical considerations have been kept at the minimum, consistent with a clear understanding of the subject. In conformity with the same policy, the number of formulas and tables has been restricted in the interest of continuity of the text. To some extent, references have been substituted for them. There would have been no difficulty in writing a book that is nearly all formulas and tables, with only sufficient other material to hold them together. There is available such a large mass of data of all kinds that any type of book could be prepared.

CONTENTS - INTRODUCTION - 2. SUGARS AND SYRUPS - 3. ARTIFICIAL AND HIGH-POWER SWEETENING AGENTS 4. ACIDS AND ACIDULATION - 5. WATER AND WATER TREATMENT - 6. FLAVORS AND FLAVORING - 7. SPECIALTY AND FRUIT FLAVORS - 8. EMULSIONS AND SPECIALTIES - 9. COLORS AND COLORING - 10. CARBON DIOXIDE AND CARBONATION - 11. BOTTLING AND CANNING - 12. COMPOSITION OF CARBONATED BEVERAGES - 13. PLANT LAYOUT AND SANITATION - 14. SPOILAGE - 15. CHEMICAL ANALYSIS - INDEX - PREFACE - In this book I have endeavored to present a comprehensive treatment of the manufacture and analysis of carbonated nonalcoholic beverages or carbonated soft drinks as they are commonly called. Each category of the raw materials used in these beverages is considered, namely, sugars and sirups, artificial sweetening agents, acids, water, flavors and flavoring, including specialty and fruit flavors and also flavor emulsions both of the clear and cloudy type, colors and coloring, and carbon dioxide. The actual manufacturing steps are described in detail in the chapter on bottling and canning and, in this connection, bottle washing, caustic solution preparation, plant layout, plant housekeeping, and sanitation are discussed in detail. The composition of the finished beverages by categories is considered. The various types of spoilage that may occur and the means for the prevention of such spoilage are treated in another chapter. Finally the methods of analysis both for control during manufacture and for the determination of composition are detailed. I acknowledge with thanks the cooperation given to me by the American Bottlers of Carbonated Beverages and by several firms. These acknowledgements are given specifically in the text. It may be noted that reference is made to American Bottlers of Carbonated Beverages, the United States Pharmacopeia, and the National Formulary standards and specifications for a number of raw materials. These agencies speak for themselves and their standards are quoted merely as guides for desirable practice. Some beverage, flavor, and color formulations are listed in this book. Some of the compositions mentioned are illustrative of commercial practice while others are of an experimental nature. These formulas have been included to serve as suggestions to the manufacturer; they are not given as a formulary. The application of knowledge of the art and skill may result in the improvement of these formulations. The mention of a particular substance in this book does not in any manner imply that I approve of the use of such a substance.

Provides comprehensive information on the quality requirements of water for each industrial use in a single volume. Almost all the major wet processing industries and quality requirements of water for such industrial processes are described in this book in detail.

Preface - Preface II - Introduction - I. Compounding Chemistry - Definitions - Physical Properties of Chemicals - II. Classes of Chemicals, Their Chemical Properties, Reactions, and Uses - III.· Chemicals Classified by Use - IV. Raw Materials - Uniform Replacement - Grade or Purity - Handling - Legal Restrictions - Formulation - Proportions - Methods of Manufacture - Costs - Use of the Finished Product - Storing Essential Oils - Water - V. Processing Procedure and Equipment - The Laboratory - The Compounding Room - Operations - Testing - Equipment - Containers and Packaging - Receiving and Shipping - VI. Marketing - Introducing a Product - Selling - New Product Development - VII. General Business Principles - Capital - Business Organization - Insurance - Business Law - Social Security - Labor Relations - Good Will - Renting vs Buying - Credits and Collections - Business Growth - Financing - Buying Materials and Equipment - Records and Bookkeeping - VIII. Technical Help - Is This the Right Time to Start Your Business? - Where to Get Information - How Much Capital Do You Need to Start? - Books - Catalogs - Trade Papers - Consultants - Trademarks - Patent Laws on Chemical Compounds - IX. Federal Laws and Regulations - X. Formulary - Adhesives and Sealants - Coatings - Cosmetics and Drugs - Polish - Detergents & Sanitizers - Miscellaneous - Appendix - Some Incompatible Chemicals - Common Hazardous Chemicals - First Aid for Chemical Injuries - Abbreviations - Common and Chemical Names - Tables - Trademark Chemicals - Supplementary List of Trademark Chemicals and Suppliers - Suppliers of Trademark Chemicals - Index -

CONTENTS - Preface - Contributors - Abbreviations - Introduction - I. Antiperspirants and Deodorants - II. Hair Products - III. Bath Preparations - IV. Face and Hand Cleaners - V. Face, Eye, and Body Makeup - VI. Creams and Lotions - VII. Mouth Preparations - VIII. Perfumes, Colognes, and Powders - IX. Shaving Preparations - X. Sunscreen Products - XI. Miscellaneous - Appendix - pH Values - pH Ranges of Common Indicators - International Atomic Weights - Temperature Conversion Tables - Incompatible Chemicals - Safety in the Laboratory or Home Workshop - General Laboratory Equipment - Aerosols - Trademark Chemical Manufacturers - Trademark Chemicals - Index - PREFACE - The growth of the cosmetic industry in the U.S.A. is a prime example of the dynamics of industry. From 1914 to 1966 the retail cosmetic sales within the U.S.A. went from almost $40 million to well over $3 billion. Part of the reason for this upsurge can be attributed to the increased interest shown by men in cosmetic products such as various shaving creams, colognes, hair tonics and conditioners. Because of the importance of this field of chemical science, it seemed pertinent to produce a chemical formulary specializing in cosmetic preparations of all types. The formulas and data in this book have all been contributed within the past twelve months by the companies listed on page iv They are printed as contributed and thus there are variations in manner of presentation. The formulas included here are of an experimental nature and are intended to be used as starting points for the industrial chemist, and for those who wish to experiment in their own right. Many of the formulas can serve as successful products without any alterations required. However, once the chemist has familiarized himself with the formulas as they stand, the adventure of individual experimentation begins. All data is based on U.S. Specification and practice, but readers in other countries should not find it difficult to adapt the formulas for their own use.

CONTENTS - Polymers and Plastics - Tradename Products and Generic Equivalents - Generic Chemical Synonyms and Cross References - Tradename Product Manufacturers - PREFACE - This compendium serves a unique function for those involved in the chemical industry-it provides the necessary information for making the decision as to which trademark chemical product is most suitable for a particular application. The chemicals included in this second book of the series have their major function as dispersants, solvents, and solubilizers, however, complete cross-referencing is provided for the multiple functions of all the chemicals. The first section which is the major portion of each volume contains the most common generic name of the chemicals as the main entry. All these generic entries are in alphabetical order. Synonyms for these chemicals are then listed. The CTFA name appears alongside the appropriate generic name. The structural and/or molecular formula of the chemical is listed whenever possible. The generic chemical is sold under various tradenames and these are listed here in alphabetical order for ease of reference along with their manufacturer in parentheses. The Category subheading lists all the possible functions that the chemical can serve. Because of differences in form, activity, etc., individual tradenames of the generic chemical are used in particular applications more frequently. These are delineated in the Applications section. The differences in properties. toxicity/handling. storage/handling, and standard packaging are specified in the subsequent sections wherever distinguishing characteristics are known. The second section of the volume TRADENAME PRODUCTS AND GENERIC EQUN ALENTS helps the user who only knows a chemical by one tradename to locate its main entry in section 1. The user can look up this tradename in this section of the book and be referred to the appropriate, main-entry, generic chemical name. The third section GENERIC CHEMICAL SYNONYMS AND CROSS REFERENCES provides a way of locating the main entries by knowing only one of the synonyms. If the generic chemical is not in the volume, it will refer you to the volume in which it is contained. The fourth section TRADENAME PRODUCT MANUFACTURERS lists the full addresses of the companies that manufacture or distribute the tradename products found in the first section.

Contents - Foreword - Introduction - List of Plates- - I Greenhouse and Plant Frames - 2 The Garden Room or Annex - 3 Bottle Gardening - 4 Ventilating, Watering, Feeding and Potting - 5 Methods of Propagation - 6 Warm Greenhouse (Stove) Plants - 7 Cool Greenhouse Plants (Soft-wooded) - 8 Hard-wooded Greenhouse Plants - 9 Annuals for the Cool Greenhouse - 10 Cacti and Other Free-flowering Succulents - 11 Attractive Greenhouse Climbers - 12 Greenhouse Plants which grow from Bulbs, Corms and Rhizomes - 13 Free-flowering Orchids for the Beginner - 14 Greenhouse Plants with Attractive Berries - 15 Ornamental-leaved Plants (including Ferns) - 16 Forcing Hardy Plants - 17 Colourful Plants for the Unheated Greenhouse - 18 Pests, Diseases and Insecticides - Index - Preface - Professor of Botany - I have written this book for the benefit of those who wish to grow suitable plants to provide flowers in a greenhouse or conservatory or to use for room decoration, during all seasons of the year. Plants which do not flower freely and are not of great decorative value have been omitted, and only those which I have found to be ideal for the purpose have been dealt with in this book. There is a vast number of greenhouse plants to be seen in botanical gardens and large private establishments, but only a limited number are offered for sale by nurserymen. From these plant catalogues, which they issue free of charge, I have selected the most decorative kinds and have given the fullest details of their cultivation. Therefore, by choosing plants from the "lists of flowering plants for every season of the year" given on p. 203, it will be found possible to provide a continuous display of flowers in the heated or unheated greenhouse. I am indebted to Messrs. T. Bath & Co., Ltd., Greenhouse Specialists, 14 Norwood Road, Herne Hill, London, S.E. 24, for supplying the photographs of types of greenhouses, ventilators and heating appliances. I am also grateful to Dr. A. J. Willis, Reader in Botany in the University of Bristol, for advice and assistance in the preparation of this book. G. F. GARDINER

CONTENTS - Conditioners, Emollients, and Lubricants - Tradename Products and Generic Equivalents - Generic Chemical Synonyms and Cross References - Tradename Product Manufacturers - PREFACE - This compendium serves a unique function for those involved in the chemical industry-it provides the necessary information for making the decision as to which trademark chemical product is most suitable for a particular application. The chemicals included in this second book of the series have their major function as dispersants, solvents, and solubilizers, however, complete cross-referencing is provided for the multiple functions of all the chemicals. The first section which is the major portion of each volume contains the most common generic name of the chemicals as the main entry. All these generic entries are in alphabetical order. Synonyms for these chemicals are then listed. The CTFA name appears alongside the appropriate generic name. The structural and/or molecular formula of the chemical is listed whenever possible. The generic chemical is sold under various tradenames and these are listed here in alphabetical order for ease of reference along with their manufacturer in parentheses. The Category subheading lists all the possible functions that the chemical can serve. Because of differences in form, activity, etc., individual tradenames of the generic chemical are used in particular applications more frequently. These are delineated in the Applications section. The differences in properties. toxicity/handling. storage/handling, and standard packaging are specified in the subsequent sections wherever distinguishing characteristics are known. The second section of the volume TRADENAME PRODUCTS AND GENERIC EQUN ALENTS helps the user who only knows a chemical by one tradename to locate its main entry in section 1. The user can look up this tradename in this section of the book and be referred to the appropriate, main-entry, generic chemical name. The third section GENERIC CHEMICAL SYNONYMS AND CROSS REFERENCES provides a way of locating the main entries by knowing only one of the synonyms. If the generic chemical is not in the volume, it will refer you to the volume in which it is contained. The fourth section TRADENAME PRODUCT MANUFACTURERS lists the full addresses of the companies that manufacture or distribute the tradename products found in the first section.

CONTENTS - Dispersants, Solvents, Solubilizers/Generic Chemical Main Entries - Tradename Products and Generic Equivalents - Generic Chemical Synonyms and Cross References - Tradename Product Manufacturers - PREFACE - This compendium serves a unique function for those involved in the chemical industry-it provides the necessary information for making the decision as to which trademark chemical product is most suitable for a particular application. The chemicals included in this second book of the series have their major function as dispersants, solvents, and solubilizers, however, complete cross-referencing is provided for the multiple functions of all the chemicals. The first section which is the major portion of each volume contains the most common generic name of the chemicals as the main entry. All these generic entries are in alphabetical order. Synonyms for these chemicals are then listed. The CTFA name appears alongside the appropriate generic name. The structural and/or molecular formula of the chemical is listed whenever possible. The generic chemical is sold under various tradenames and these are listed here in alphabetical order for ease of reference along with their manufacturer in parentheses. The Category subheading lists all the possible functions that the chemical can serve. Because of differences in form, activity, etc., individual tradenames of the generic chemical are used in particular applications more frequently. These are delineated in the Applications section. The differences in properties. toxicity/handling. storage/handling, and standard packaging are specified in the subsequent sections wherever distinguishing characteristics are known. The second section of the volume TRADENAME PRODUCTS AND GENERIC EQUN ALENTS helps the user who only knows a chemical by one tradename to locate its main entry in section 1. The user can look up this tradename in this section of the book and be referred to the appropriate, main-entry, generic chemical name. The third section GENERIC CHEMICAL SYNONYMS AND CROSS REFERENCES provides a way of locating the main entries by knowing only one of the synonyms. If the generic chemical is not in the volume, it will refer you to the volume in which it is contained. The fourth section TRADENAME PRODUCT MANUFACTURERS lists the full addresses of the companies that manufacture or distribute the tradename products found in the first section.

CONTENTS - Plasticizers, Stabilizers, and Thickeners - Tradename Products and Generic Equivalents - Generic Chemical Synonyms and Cross References - Tradename Product Manufacturers - PREFACE - This compendium serves a unique function for those involved in the chemical industry-it provides the necessary information for making the decision as to which trademark chemical product is most suitable for a particular application. The chemicals included in this second book of the series have their major function as dispersants, solvents, and solubilizers, however, complete cross-referencing is provided for the multiple functions of all the chemicals. The first section which is the major portion of each volume contains the most common generic name of the chemicals as the main entry. All these generic entries are in alphabetical order. Synonyms for these chemicals are then listed. The CTFA name appears alongside the appropriate generic name. The structural and/or molecular formula of the chemical is listed whenever possible. The generic chemical is sold under various tradenames and these are listed here in alphabetical order for ease of reference along with their manufacturer in parentheses. The Category subheading lists all the possible functions that the chemical can serve. Because of differences in form, activity, etc., individual tradenames of the generic chemical are used in particular applications more frequently. These are delineated in the Applications section. The differences in properties. toxicity/handling. storage/handling, and standard packaging are specified in the subsequent sections wherever distinguishing characteristics are known. The second section of the volume TRADENAME PRODUCTS AND GENERIC EQUN ALENTS helps the user who only knows a chemical by one tradename to locate its main entry in section 1. The user can look up this tradename in this section of the book and be referred to the appropriate, main-entry, generic chemical name. The third section GENERIC CHEMICAL SYNONYMS AND CROSS REFERENCES provides a way of locating the main entries by knowing only one of the synonyms. If the generic chemical is not in the volume, it will refer you to the volume in which it is contained. The fourth section TRADENAME PRODUCT MANUFACTURERS lists the full addresses of the companies that manufacture or distribute the tradename products found in the first section.

PREFACE - This encyclopedia is an attempt to coordinate and unify practical information on plastic, polymer, and resin trademark products. These categories overlap, i.e., plastics are a subset of polymers, and resins are often, but not always, polymers. However, it has been our aim to give the user of this compilation fingertip availability to a large quantity of essential information about these products. This three-volume compendium has been made possible through the cooperation of the major national and international plastic, polymer, and resin manufacturers. The information provided here has been gleaned from thousands of brochures, technical bulletins, and data sheets, but the extent of the information provided for each product has been limited by the amount of data given to us by the manufacturers. Whenever possible and/or appropriate, we have given the chemical description, applications, form and color, general, mechanical, thermal, and electrical properties of each product. With the state of technological growth in these industries constantly increasing, this encyclopedia should serve as an important tool for chemists, engineers, and salespeople here and abroad. We want to extend our thanks to Roberta Dakan for her tireless efforts in helping make this encyclopedia as accurate and consistent as possible. It should be noted that when the temperatures of properties such as viscosity, density, solubility, etc. are not included, a standard temperature of 25 C is to be assumed. The information in this publication is reliable to the best of our knowledge. We would appreciate being informed of any errors or omissions so that these can be integrated into subsequent editions of this encyclopedia.

PREFACE - This encyclopedia is an attempt to coordinate and unify practical information on plastic, polymer, and resin trademark products. These categories overlap, i.e., plastics are a subset of polymers, and resins are often, but not always, polymers. However, it has been our aim to give the user of this compilation fingertip availability to a large quantity of essential information about these products. This three-volume compendium has been made possible through the cooperation of the major national and international plastic, polymer, and resin manufacturers. The information provided here has been gleaned from thousands of brochures, technical bulletins, and data sheets, but the extent of the information provided for each product has been limited by the amount of data given to us by the manufacturers. Whenever possible and/or appropriate, we have given the chemical description, applications, form and color, general, mechanical, thermal, and electrical properties of each product. With the state of technological growth in these industries constantly increasing, this encyclopedia should serve as an important tool for chemists, engineers, and salespeople here and abroad. We want to extend our thanks to Roberta Dakan for her tireless efforts in helping make this encyclopedia as accurate and consistent as possible. It should be noted that when the temperatures of properties such as viscosity, density, solubility, etc. are not included, a standard temperature of 25 C is to be assumed. The information in this publication is reliable to the best of our knowledge. We would appreciate being informed of any errors or omissions so that these can be integrated into subsequent editions of this encyclopedia.

PREFACE - This encyclopedia is an attempt to coordinate and unify practical information on plastic, polymer, and resin trademark products. These categories overlap, i.e., plastics are a subset of polymers, and resins are often, but not always, polymers. However, it has been our aim to give the user of this compilation fingertip availability to a large quantity of essential information about these products. This three-volume compendium has been made possible through the cooperation of the major national and international plastic, polymer, and resin manufacturers. The information provided here has been gleaned from thousands of brochures, technical bulletins, and data sheets, but the extent of the information provided for each product has been limited by the amount of data given to us by the manufacturers. Whenever possible and/or appropriate, we have given the chemical description, applications, form and color, general, mechanical, thermal, and electrical properties of each product. With the state of technological growth in these industries constantly increasing, this encyclopedia should serve as an important tool for chemists, engineers, and salespeople here and abroad. We want to extend our thanks to Roberta Dakan for her tireless efforts in helping make this encyclopedia as accurate and consistent as possible. It should be noted that when the temperatures of properties such as viscosity, density, solubility, etc. are not included, a standard temperature of 25 C is to be assumed. The information in this publication is reliable to the best of our knowledge. We would appreciate being informed of any errors or omissions so that these can be integrated into subsequent editions of this encyclopedia.

PREFACE - This encyclopedia is an attempt to coordinate and unify practical information on plastic, polymer, and resin trademark products. These categories overlap, i.e., plastics are a subset of polymers, and resins are often, but not always, polymers. However, it has been our aim to give the user of this compilation fingertip availability to a large quantity of essential information about these products. This three-volume compendium has been made possible through the cooperation of the major national and international plastic, polymer, and resin manufacturers. The information provided here has been gleaned from thousands of brochures, technical bulletins, and data sheets, but the extent of the information provided for each product has been limited by the amount of data given to us by the manufacturers. Whenever possible and/or appropriate, we have given the chemical description, applications, form and color, general, mechanical, thermal, and electrical properties of each product. With the state of technological growth in these industries constantly increasing, this encyclopedia should serve as an important tool for chemists, engineers, and salespeople here and abroad. We want to extend our thanks to Roberta Dakan for her tireless efforts in helping make this encyclopedia as accurate and consistent as possible. It should be noted that when the temperatures of properties such as viscosity, density, solubility, etc. are not included, a standard temperature of 25 C is to be assumed. The information in this publication is reliable to the best of our knowledge. We would appreciate being informed of any errors or omissions so that these can be integrated into subsequent editions of this encyclopedia.

PREFACE - This comprehensive, modem encyclopedia of surfactant products has been compiled with the cooperation of the major national and international surfactant manufacturers in order to give the user quick and thorough information on each tradename product that is included. Information from thousands of brochures, technical bulletins, and data sheets has been gleaned in order to make a complete profile on each surfactant product available from one source-this three volume compendium. Though sometimes limited by the information provided by the manufacturers, in most instances, the chemical ingredients, properties, form, applications, etc. of each product are discussed in detail. The use of surfactants pervades almost every chemical industrial concern- including textiles, paints, pesticides, foods, cosmetics, pharamceuticals, etc. We hope that because of the universality of surfactants, this reference work will be able to serve as a useful tool to the many chemical engineers and salespeople here and abroad. We want to extend our thanks to Roberta Dakan for her dedication and tireless efforts in helping make this encyclopedia as accurate and consistent as possible. When the temperature at which properties such as viscosity, density, surface tension; solubilities, etc. is not included, a standard temperature of 25 C is to be assumed. The information in this publication is reliable to the best of our knowledge. We would be glad to be informed of any errors or omissions so that these can be integrated into subsequent editions of this encyclopedia.

PREFACE - This comprehensive, modem encyclopedia of surfactant products has been compiled with the cooperation of the major national and international surfactant manufacturers in order to give the user quick and thorough information on each tradename product that is included. Information from thousands of brochures, technical bulletins, and data sheets has been gleaned in order to make a complete profile on each surfactant product available from one source-this three volume compendium. Though sometimes limited by the information provided by the manufacturers, in most instances, the chemical ingredients, properties, form, applications, etc. of each product are discussed in detail. The use of surfactants pervades almost every chemical industrial concern- including textiles, paints, pesticides, foods, cosmetics, pharamceuticals, etc. We hope that because of the universality of surfactants, this reference work will be able to serve as a useful tool to the many chemical engineers and salespeople here and abroad. We want to extend our thanks to Roberta Dakan for her dedication and tireless efforts in helping make this encyclopedia as accurate and consistent as possible. When the temperature at which properties such as viscosity, density, surface tension; solubilities, etc. is not included, a standard temperature of 25 C is to be assumed. The information in this publication is reliable to the best of our knowledge. We would be glad to be informed of any errors or omissions so that these can be integrated into subsequent editions of this encyclopedia.

PREFACE - This comprehensive, modem encyclopedia of surfactant products has been compiled with the cooperation of the major national and international surfactant manufacturers in order to give the user quick and thorough information on each tradename product that is included. Information from thousands of brochures, technical bulletins, and data sheets has been gleaned in order to make a complete profile on each surfactant product available from one source-this three volume compendium. Though sometimes limited by the information provided by the manufacturers, in most instances, the chemical ingredients, properties, form, applications, etc. of each product are discussed in detail. The use of surfactants pervades almost every chemical industrial concern- including textiles, paints, pesticides, foods, cosmetics, pharamceuticals, etc. We hope that because of the universality of surfactants, this reference work will be able to serve as a useful tool to the many chemical engineers and salespeople here and abroad. We want to extend our thanks to Roberta Dakan for her dedication and tireless efforts in helping make this encyclopedia as accurate and consistent as possible. When the temperature at which properties such as viscosity, density, surface tension; solubilities, etc. is not included, a standard temperature of 25 C is to be assumed. The information in this publication is reliable to the best of our knowledge. We would be glad to be informed of any errors or omissions so that these can be integrated into subsequent editions of this encyclopedia.