Gjør som tusenvis av andre bokelskere
Abonner på vårt nyhetsbrev og få rabatter og inspirasjon til din neste leseopplevelse.
Ved å abonnere godtar du vår personvernerklæring.Du kan når som helst melde deg av våre nyhetsbrev.
The use of Substrate Integrated Waveguide (SIW) in the design of microwave band pass filter has been very popular in recent years. Attractive SIW filters include compact size, high power handling capability and low loss. The aim of this project is to design and investigate the performance of RF filter using Half-mode Substrate Integrated Waveguide (HMSIW) technique. The project is divided into three major parts, design, simulation and fabrication. The report starts with a brief literature review followed by details on the most important aspects of building a filter. The simulation software¿s used are briefly discussed with the key aspects of individual and how they are being used in the design and simulation process. The next section comprises of details about the design process combining with bulk simulation data and also the fabrication process of the filter. The section compares data after methodical changes brought to the filter and concludes by discussing about the final experimental data. The following section briefly summarizes all the simulation performed on a multilayer filter, and observes how certain changes to the filter affect the response.
Rolling Element bearings are among the most common elements used in the operation of rotating machines. They are, however, one of the weak points in these machines where a large majority of problems associated are caused by bearing failures. As a result, condition monitoring of the rolling element bearings are important in order to keep these machineries in their proper operating condition. Analysis and maintenance of any rolling element bearings failures are made much easier if any fault can be identified during its early stage. Thus, it is the aim of this book to investigate the relative shaft displacement and bearing housing vibration measurements for the early fault detection in rolling element bearings. Experiments were conducted on a rotor Kit that closely simulates the actual behaviour of rotating machines.
Abonner på vårt nyhetsbrev og få rabatter og inspirasjon til din neste leseopplevelse.
Ved å abonnere godtar du vår personvernerklæring.