Bøker av Larry Shepard

<p>The photos in this edition are black and white.</p><p><p>Over the last 40 years, millions of Chrysler, AMC, and Jeep vehicles have used these differentials, propelling these high-performance vehicles to victory on the street, in drag racing, and other applications. Chrysler used the Dana 60 and BorgWarner Sure-Grip high-performance differentials in the Challenger, Charger, Barracuda, Super Bee and many other renowned Chrysler muscle cars. These differentials have been tied to historic powerhouse engines, such as the Chrysler Magnum and Hemi V8s in stock car, drag racing, and other forms of racing, making history in the process. Jeep CJs and Cherokees have used the Dana 44 and AMC 20 and put these differentials under tremendous loads, which often requires frequent rebuilds. After years of use, these differentials require rebuilding, and of course aftermarket suppliers offer ring and pinion and other parts to upgrade these axles. <p>In this Workbench series title, the focus is on the disassembly, inspection and step-by-step rebuild of the most popular high-performance differentials. Axles and differentials are not incredibly complex components, but there are some specific steps to follow for rebuilding, upgrading, and setting them up properly, and this book demystifies the process and explains it in detail. A book dedicated to the Dana, Sure-Grip, and AMC Jeep axles has never been published before, and Mopar, Jeep and AMC enthusiasts are hungry for this information. The Dana and AMC axles should remain in wide use into the foreseeable future, and therefore there will be a consistent demand for this information. <p>This book will also feature extensive gear and application charts, so the reader is sure to select the correct gear ratio for a particular vehicle and application.  Special coverage is therefore dedicated to ring and pinion gears. In addition selecting the best aftermarket and production axle shafts is covered as well as modifying and upgrading the differential housings. 

<p>Hit the horsepower goal of your Mopar small-block engine using this guide that identifies the best parts and techniques to extract maximum performance from LA and Magnum powerplants.<p>Mopar engine expert and author Larry Shepard covers heads, cams, and valvetrain products and modifications that will give you more power. In addition, he provides exquisite details and in-depth buildup instruction for other essential components: blocks, cranks, pistons, rods, ignition systems, intakes, carburetors, and exhaust.<p>The Chrysler LA-series and Magnum small-blocks are powerful, efficient, and quick-revving engines that have dutifully powered millions of Chrysler/Dodge/Plymouth cars and trucks from 1964 to 2003. And the LA engine is also the powerplant for many classic Mopar muscle cars, including the Charger, Barracuda, Challenger, Dart, and others. While these venerable small-blocks have delivered impressive performance in stock trim, both can be easily modified to produce much greater power for almost any application.<p>The LA designates the small-block as "Lightweight A," which was a huge improvement over the previous generation. With its compact size, 50-pound weight savings, thin wall casting, and wedge heads, it cranked out a lot of torque and horsepower, so it was formidable competition on the street and track. The LA was offered in 273-, 318-, 340- and 360-ci inch iterations, and a full range of aftermarket products are offered for these engines. By 1992, the LA engine platform had evolved into the Magnum 5.2- and 5.9-liter engines and became the new standard of Mopar small-block performance. <p>If you own an LA small-block-powered Mopar car or truck, this invaluable guidance and instruction will allow you to optimize performance and maintain reliability. 

When Chrysler released the "new" third-generation Hemi engine in 2003, the automotive public placed high expectations on the Hemi's triumphant return. The Hemi Gen III 5.7L, 6.1L, and 6.2L supercharged and 6.4L engines didn't disappoint; they produced copious amounts of horsepower and torque while delivering exceptional durability. These powerful engines occupy the engine bays of new Challengers, Chargers, Magnums, 300Cs, Durangos, Jeep Grand Cherokees, and Ram trucks. Many of these engines have been used for high-performance service or logged hundreds of thousands of road miles, and as a result, many need to be rebuilt. Long-time Mopar engineer, racing coordinator, and veteran author Larry Shepard delivers thorough instructions for each crucial step of the rebuilding process. Before commencing engine teardown, Shepard shows you how to accurately assess the health of the engine. Disassembly and comprehensive inspection instructions are provided so you can determine and remedy any underlying problems. Expert insight allows you to select the ideal parts package for your rebuild, whether OEM replacement or compatible and complementary high-performance parts are selected. The most pertinent information for the latest machining practices is provided, so you can coordinate with the machine shop to return the block, head, intake, and other surfaces to like-new condition. Assembling the cylinder heads as well as accurately measuring, checking clearances, and test fitting parts is detailed, so you're sure all components are within spec and ready for final assembly. Finally, comprehensive step-by-step instructions are provided for assembling all components into a completed engine. The modern Hemi engine is lighter and stronger and offers far better drivability and performance than its predecessors. However, after hundreds of thousands of miles, extreme use, or high-performance applications, these rugged engines require a professional-caliber rebuild. With this book, you can confidently complete your Hemi rebuild and get your car or truck back into action.