Bøker av Floyd Clymer

This manual is compiled using data from seven of the Alfa Romeo factory 'Mechanical Repair' publications plus a number of additional pages of maintenance, repair, overhaul and wiring diagrams that were not included in the factory publications.

376 pages, with more than 300 illustrations, diagrams and charts, size 5.5 x 8.5 inches. Originally published under the title, Corvair Owner's Handbook of Maintenance & Repair by Floyd Clymer, this edition was republished in 2016 by VelocePress. Written in easy to understand language, this is possibly the most user-friendly and comprehensive owner's workshop manual ever published for all variations of the Chevrolet Corvair. There are detailed instructions for the overhaul, service and maintenance of the major mechanical and electrical components including a comprehensive section on the maintenance and repair of the turbocharger and the various carburetor systems fitted to this series of cars. In addition, there is a separate 100 plus page section that deals with the maintenance and repair of the mechanical modifications that are specific to the 1965 and later models. Out-of-print and unavailable for many years, this book is becoming increasingly more difficult to find on the secondary market and we are pleased to be able to offer this reproduction as a service to all Chevrolet Corvair owners, restorers and enthusiasts worldwide.

A comprehensive workshop manual for all Volvo cars manufactured from 1944 through 1968 utilizing the B14 (1414cc) B16 (1583cc) and B18 (1778cc) engines and M4, M30 and M40 transmissions and overdrive. Specific models include the PV444, PV544 (P110), P1800, PV445, and P122 (P120 & Amazon). However, as the same driveline was used for the P210, P130, P220,144,142 and 145 through the 1968 model year much of the data is also applicable to these models. Measuring 5.5 x 8.5 inches, with 464 pages and 438 illustrations, charts and specifications it would be difficult to imagine that a more complete manual exists for these early Volvo automobiles. Originally published by Floyd Clymer this is a faithful reproduction of the 1964 publication. It includes complete technical data, service and maintenance information and comprehensive detailed instructions for the repair and overhaul of all major and minor mechanical and electrical components, making it an invaluable resource for collectors and restorers of these classic automobiles. There are separate sections that deal with the repair and overhaul procedures for the engine, fuel system, carburetors, ignition system, clutch, transmission, overdrive, drive shaft, rear axle, suspension, steering and brakes, plus a detailed electrical section including wiring diagrams. There is a comprehensive chapter on routine service, maintenance and tune ups that also includes detailed specification charts. Out-of-print and unavailable for many years and becoming increasingly more difficult to find on the secondary market this is a - must have - reference for this series of Volvo automobiles and we are pleased to be able to offer this reproduction as a service to all Volvo enthusiasts worldwide.

A faithful reproduction of the 1967 Floyd Clymer publication of the official factory BMW (Bayerische Motoren Werke) Workshop Manual for the R50, R50S, R60 and R69S twin cylinder motorcycles. It also includes the supplement issued by the factory for the USA versions R50US, R60US and R69US. --- There are exhaustive tables of technical data, tolerances and fits and all of the expected data from a factory publication for the repair and overhaul of all major and minor mechanical and electrical components, making it an invaluable resource for collectors and restorers of these classic BMW motorcycles. --- There are 257 illustrations and each procedure is explained in a step-by-step method using an appropriate illustration. The translation from German to English is, at times, a little quirky but the profuse illustrations make up for any difficulty in understanding what needs to be done! --- True to the original, this reproduction is published in four languages, English, German, French and Spanish making this a universal publication and required reading for any owner. Out-of-print and unavailable for many years, this book is highly sought after on the secondary market and we are pleased to be able to offer this reproduction as a service to all BMW enthusiasts worldwide.

A previously unpublished manual from the Floyd Clymer archives. It includes complete technical data, service and maintenance information and comprehensive detailed instructions for the repair and overhaul of all major and minor mechanical and electrical components for the 1948 to 1961 Jaguar MK 7, MK 8, MK 9 and the XK120, XK140, XK150 automobiles.

Compiled and updated from the two Floyd Clymer books, 'Handbook of Imported Carburetors & Fuel Injection' and 'BMC Mini Cars Handbook', this publication is specific to the H, HS and HD series of SU carburetors, specifically the H1, H2, HS2, H4, HS4, H6, HS6, HD6 & HD8 types.

114 pages, and more than 340 illustrations and charts, size 8.25 x 10.75 inches. This Workshop Manual is a faithful reproduction of the original Honda Factory Manual for the CB350F and the CB400F four-cylinder models manufactured from 1972 through 1977. The original CB350F released in 1972 ultimately morphed into the 1975 CB400F and the original 'base' CB350F workshop manual was expanded, by the factory, to include a supplement for the CB400F model.Beginning in 1968 and extending through the 1975 model year, the common 'K' suffix often, but not always, changed on an annual basis. 'K0' or occasionally 'F0' was normally used to indicate the first model in the series with updated versions identified as either K or F 1, 2, 3, etc. While the alpha number designations continued in use outside the USA through 1978, in September 1973, American Honda adopted a year identifier within the model number - for example; a CB400F'76 would be a 1976 USA model but in most other countries, that same model would be identified as either a CB400K2 or CB400F1. Setting this potential for confusion aside, we can state that this manual covers the entire 1972 through 1977 range of 350cc and 400cc four-cylinder models.Finally, please note that the text in the original Honda Factory Workshop Manual was translated from Japanese into English. Consequently, some of the phrasing, grammar, punctuation and word usage may be subtly different from that commonly used in the English language. However the information, as presented, is readily understandable. In addition, while we have done our best to identify any anomalies, errors and incorrect spelling that may have occurred during the original translation process, we are certain that we will have missed one or two and we request your indulgence in ignoring them.

194 pages, and more than 500 illustrations and charts, size 8.25 x 10.75 inches. This Workshop Manual is a compilation of various Honda Factory Manuals for the three variants of the 500cc and 550cc four-cylinder models manufactured from 1971 through 1978. The original CB500 released in 1971 ultimately morphed into the 1974 CB550 and the 1975 CB550F 'Super Sport'. The original 'base' 500cc manual was expanded, by the factory, to include the CB550 and subsequently updated with supplements for the later models. It covers the 1971-1973 K0, K1 & K2 CB500 the 1974-1978 CB550 K0, K1, K2 ('76), K3 ('77) & K4 ('78) and the 1975-1977 CB550F F0, F1 ('76) & F2 ('77). Beginning in 1968 and extending through the 1975 model year, the 'K' suffix often, but not always, changed on an annual basis. 'K0' was normally used to indicate the first model in the series with updated versions identified as K1, K2, K3 etc. While the 'K' number designations continued in use outside the USA through 1978, in September 1973, American Honda adopted a year identifier within the model number - for example; a CB550'76 would be a 1976 USA model but in most other countries, that same model would be identified as a CB550K2. Setting this potential for confusion aside, we can state that this manual covers the entire 1971 through 1978 range of 500cc and 550 cc four-cylinder models. After his visit to Japan in 1961, Floyd Clymer published 'The Complete Catalog of Japanese Motor Vehicles' (ISBN 9781588502209). Based on his experiences during that visit, Floyd also anticipated the need for repair manuals for those Japanese motorcycles that were just starting to be imported into the USA [Yamaha (1958), Honda (1959), Suzuki (1963)]. The predominance of the Floyd Clymer Japanese motorcycle manuals were either reprints or compilations of the factory publications which today makes them more desirable than the current aftermarket manuals.

312 pages and more than 600 illustrations and charts, size 8.25 x 10.75 inches. When the new Porsche 914 was announced in 1969 (as a 1970 Model), Floyd Clymer had already published a number of Porsche and VW manuals. Those publications included manuals for the Porsche 356 and 912, the VW Beetle, the 1500cc/1600cc Square-back/Hatch-back and the Transporter/Bus. Consequently, it was no surprise that Floyd would begin preparation of a 914 shop manual. Floyd was able to complete the Porsche 914 manual in record time, mainly because he was able to re-use most all of the 'mechanical' pages from his previously published Porsche and VW manuals. The only entirely 'new' section that he had to prepare was a chapter for the body components as they were uniquely different from any previous Porsche or VW model. Unfortunately, due to his untimely passing in early 1970 the 914 manual, although complete, remained unpublished and obviously, it only covered the early 914/4 1.7 liter and the 914/6 2.0 liter engines. We have taken that original manual and updated the information to cover the later 4 cylinder 1.8 liter and 2.0 liter models through 1976. While much of the general data is shared between both the 4 and 6 cylinder 914 variants, owners of the 6-cylinder 914 model are encouraged to read any individual chapter in its entirety, as it may include information that is specific to the 6-cylinder version.

246 pages and more than 240 illustrations and charts, size 8.25 x 10.75 inches. This publication is a reproduction of the Triumph factory workshop manual part number 99-0963/0887/4223. The original 1969 Trident workshop manual 99-0887 was updated in 1972 under part number 99-0963. A short time later, the introduction of a 5-speed gearbox (1972) and a front wheel disc brake (1973) necessitated the publication of a supplement 00-4223 which was then incorporated into the 99-0963 manual creating a single workshop manual for the 1968 through 1974 models. Unfortunately, the 99-0963 manual was also published without the 00-4223 supplement and the manual that includes the supplement can only be identified by the following notation printed to the bottom corner of the title page: 'PART NO. 99-0963 INCORPORATING 99-0887 AND SUPPLEMENT 00-4223'The difference in content between the two manuals that carry the same part number is extremely important to owners of the 5-speed and disc brake models.There were a number of 'running changes' made throughout the 6-year production run of these models and, in order to provide information applicable to those changes, the 00-4223 supplement was either merged or appended to the end of the appropriate sections within the manual. However, it is also important to note, with regard to any maintenance and repair instructions and also the specifications in the 'General Data' (GD) section, that whenever engine numbers are stated, the data will be specific to that particular series. Therefore, the reader is encouraged to pay close attention to any engine number notations and to read the entire section plus the supplemental data prior to commencing any work. In conclusion, 750cc T150 and T150V owners are subjected to considerable confusion surrounding the appropriate selection of the multitude of originals and reprints of the various 750cc Trident manuals that have recently flooded the marketplace. However, the combination manual 99-0963/99-0887/00-4223 is the most comprehensive manual for the entire line of 750cc Trident three-cylinder motorcycles produced from 1968 through 1974, however, it is somewhat scarce and difficult to find. In addition, many of the changes made during the production run necessitate the use of this 'combination' manual and we are pleased to offer this reprint of the 99-0843/99-0948/00-4223 manual as a service to all 750cc T150, T150V owners. In addition, as the X75 Hurricane is a combination of both the Trident and the BSA Rocket 3 this manual will also be of interest to owners of that model.The models covered are: 1968 to 1970 T150 Trident1971 to 1972 T150 Trident1972 to 1974 T150V Trident - with 5 speed gearbox and disc front brake.

180 pages, and more than 150 illustrations and charts, size 8.25 x 10.75 inches. Owners of Norton Commando motorcycles are subjected to considerable confusion surrounding the selection of an appropriate workshop manual from the multitude of originals and reprints that have recently flooded the on-line marketplace. Many of the reprints found on internet websites are from 'bedroom sellers' at enticingly low prices by individuals that really have no idea what they are selling. Many are nothing more than poor quality comb-bound photocopies that are scanned and printed complete with greasy pages and thumbprints and, as such, are deceptively described as 'pre-owned'. In addition, they are often advertised for the incorrect series and/or model years of motorcycles. The Norton Commando model range is especially subjected to incorrect identification by these 'bedroom sellers' and you are encouraged to read the paragraph below to help identify the correct manual for your model. During the 1968 to 1978 Commando model run there were 4 different manuals published by the factory: The original 52 page 750cc manual (part number 06-3062) is applicable to the 1968 to1970 models ONLY that were fitted with the external rev-counter drive and/or the Atlas style exhaust (refer to ISBN 9781588502421). This original manual was followed by part number 06-3419 which covers the 1970 to1973 750cc models ONLY. The next, and most comprehensive manual, part number 06-5146, was published in 1973 and the 850cc data was added making this manual applicable to the entire range of 750cc & 850cc models from 1970 to 1975 (refer to ISBN 9781588502438). Finally, with the introduction of the electric start, left side gear change, rear disc brake Mark 3 models in 1975, a separate manual part number 00-4224 was published which is specific to the 1975 to 1978 MKIII 850cc series from engine no. 325001 & frame no. F125001. We are pleased to offer this reproduction of the Factory Workshop Manual 00-4224 to owners of the 1975 onwards Commando Mark 3 models and we hope that the explanation above removes any doubt regarding which manual is correct for a particular series of Norton Commando model. Models and model years covered in this manual are: - Interstate: 828cc 1975 -1978- Roadster: 828cc 1975-1978- Hi-rider: 828cc 1975-1978- Interpol: 828cc 1975-1978IMPORTANT: Owners of 1968 to 1970 750cc Commando models that were fitted with the external rev counter drive and/or Atlas style exhaust system are directed to our workshop manual ISBN 9781588502421 and owners of the 1970 to 1975 750cc & 850cc models would require our workshop manual ISBN 9781588502438. VelocePress.com has been publishing reprints of motorcycle and automobile manuals since 2003 and our publications have earned excellent reviews worldwide so you can be assured you are purchasing a quality product.

252 pages, and more than 240 illustrations and charts, size 8.25 x 10.75 inches. This publication is a faithful reproduction of the 1962-1965 BSA Factory Workshop Manual part number 00-4113 that covers the A50 (500cc) and A65 (650cc) unit-construction twins manufactured between August 1961 through the end of July 1965. It should be noted that BSA model years ran from August through July. For example, the 1962 models were released in August 1961, the 1963 models in August 1962 etc. This can, at times, cause confusion and the only sure method of determining 'what year is it?' is by the serial number. The various engine and frame numbers for the 1962 to 1965 unit-construction twins are shown in the table below. Note that the pre-1966 engine and frame numbers seldom matched. MODEL KEY: C = Cyclone, CC = Cyclone Competition, L = Lightning, LC = Lightning Clubman, LR = Lightning Rocket, R = Rocket, S = Star, SH = Spitfire Hornet, TR = Thunderbolt Rocket. EXTENSION (-) KEY: CB = Cable (Rear) Brake, CR = Close Ratio Gearbox, PM = Police Model, RB = Rod (Rear) Brake, RC = Rev Counter, UK = United Kingdom Model, US = USA Model. 1962 Engine/FrameA50S-CB A50-101/A50-101A50S-RB A50-101/A50A-101A65S-CB A65-101/A50-101A65S-RB A65-101/A50A-1011963 Engine/FrameA50S-CB A50-823/A50-2288A50S-RB A50-823/A50-2701A65S-CB A65-1947/A50-2288A65S-RB A65-1947/A50-27011964 Engine/FrameA50S A50A-101/A50-5501A50-PM A50AP-101/A50-5501A50C-US A50B-101/A50B-101A50C-CR A50B-C101/A50B-101A65S A65A-101/A50-5501A65-PM A65AP-101/A50-5501A65R A65B-101/A50B-101A65R-RC A65C-101/A50-5501A65TR A65B-101/A50-5501A65LR A65D-101/A50B-101A65SH A65E-101/A50B-1011965 Engine/FrameA50S A50A-686/A50-8437A50-PM A50AP-121/A50-8437A50C-US A50D-101/A50B-4001A50CC-US A50B-507/A50B-4001A50C-UK A50DC-101/A50B-4001A50CC-UK A50DC-101/A50B-4001A65S

194 pages, and more than 240 illustrations and charts, size 8.25 x 10.75 inches. In 1945, after the war had ended, BSA resumed production of their civilian line of motorcycles. However, they continued their pre-war practice of publishing repair, overhaul and technical information in the form of individual 'Service Sheets'. These sheets were 'dealer only' publications and, as such, the print quality was at times somewhat questionable. It was not until the early 1960's that BSA eventually started publishing model specific workshop manuals that were available to the general public. Consequently, these 'Service Sheets' were the only publications available for the maintenance and repair of BSA models that were manufactured through the early 1960's. At some point in the 1930's, BSA adopted the practice of identifying their various model types by 'groups' and the models manufactured from 1945 through the mid 1960's were in Groups A, B, C, D and M. The service sheets that were associated to a particular group were identified numerically and, while there were some exceptions due to overlapping data between models, in general terms the numbers relate to a particular model group. They are as follows: The 200 series of service sheets were applicable to Group A models, the 300 series to Group B, the 400 series to Group C, the 500 series to Group D and the 600 series to Group M. In addition, there were a 700 series applicable to mechanical maintenance and an 800 series for electronic service and wiring diagrams. Both the 700 and 800 series of service sheets contained information that was not model specific but was applicable across multiple model groups. Unfortunately, as these service sheets were issued individually and at random times, the numbering sequence within any group is, at times, illogical and not necessarily consecutive. Consequently, assembling those individual sheets into a publication that serves as a model specific workshop manual is a somewhat difficult task and owners of BSA motorcycles are subjected to considerable confusion surrounding the appropriate selection from the multitude of reprints that have recently flooded the on-line marketplace. Many of the reprints found on internet websites are from 'bedroom sellers' at enticingly low prices by individuals that really have no idea what they are selling. Many are nothing more than poor quality comb-bound photocopies that are scanned and printed complete with greasy pages and thumbprints and, as such, are deceptively described as 'pre-owned', 'used' or even 'refurbished'! In addition, they are often advertised for the incorrect series and/or model years of motorcycles. The most complete compilation of the 1945 and onwards service sheets was issued by BSA in the form of a 'dealer only' ring binder that contained all of the individual service sheets totaling to almost 500 pages, it is extremely scarce and difficult to find. This manual contains 59 service sheets (190 pages) extracted from that 'dealer only' publication, which cover the 1945 to 1960 pre-unit, rigid, plunger and swing arm B31, B32, B33 and B34 plus Gold Star and Competition models. Please note that service sheets other than those in the 300 series that are included in this publication may also contain data that is applicable to 'other' model groups, as that was the original intention. For additional information the reader is directed to 'The Book of the BSA 250cc, 350cc, 500cc & 600cc OHV & SV singles 1945 to 1959' (ISBN 9781588502292) which covers the B31, B32, B33, B34, C10, C11, C11DL, M20, M21 & M33 models. For later models see 'The Book of the BSA OHV Singles 350cc & 500cc 1955-1967' (ISBN 9781588501561) which covers the B31, B32, B33, B34 & Star B40 & SS90.

172 pages, and more than 140 illustrations and charts, size 8.25 x 10.75 inches. Owners of Norton Commando motorcycles are subjected to considerable confusion surrounding the selection of an appropriate workshop manual from the multitude of originals and reprints that have recently flooded the on-line marketplace. Many of the reprints found on internet websites are from 'bedroom sellers' at enticingly low prices by individuals that really have no idea what they are selling. Many are nothing more than poor quality comb-bound photocopies that are scanned and printed complete with greasy pages and thumbprints and, as such, are deceptively described as 'pre-owned'. In addition, they are often advertised for the incorrect series and/or model years of motorcycles. The Norton Commando model range is especially subjected to incorrect identification by these 'bedroom sellers' and you are encouraged to read the paragraph below to help identify the correct manual for your model.During the 1968 to 1978 Commando model run there were 4 different manuals published by the factory: The original 52 page 750cc manual (part number 06-3062) is applicable to the 1968 to1970 models ONLY that were fitted with the external rev-counter drive and/or the Atlas style exhaust (refer to ISBN 9781588502421). This original manual was followed by part number 06-3419 which covers the 1970 to1973 750cc models ONLY. The next, and most comprehensive manual, part number 06-5146, was published in 1973 and the 850cc data was added making this manual applicable to the entire range of 750cc & 850cc models from 1970 to 1975. Finally, with the introduction of the electric start, left side gear change, rear disc brake Mark 3 models in 1975, a separate manual part number 00-4224 was published which is specific to the 1975 to 1978 MKIII 850cc series from engine no. 325001 & frame no. F125001.We are pleased to offer this reproduction of the Factory Workshop Manual 06-5146 to owners of the 1970 through 1975 models and we hope that the explanation above removes any doubt regarding which manual is correct for a particular series of Norton Commando model.Models and model years covered in this manual are: Interstate: 745cc 1972-1973 & 828cc 1973-1975Roadster: 745cc 1970-1973 & 828cc 1973-1975Hi-rider: 745cc 1971-1973 & 828cc 1973-1975Interpol: 745cc 1970-1973 & 828cc 1973-1975Fastback: 745cc 1970-1973Fastback LR (Long Range): 745cc 1971-1972S Type: (Scrambler) 745cc 1970SS Type (Street Scrambler): 745cc 1970-1971IMPORTANT: Owners of 1968-1970 750cc Commando models are directed to our workshop manual ISBN 9781588502421 and owners of the later MKIII models would require our 1975-1978 manual ISBN 9781588502445.VelocePress.com has been publishing reprints of motorcycle and automobile manuals since 2003 and our publications have earned excellent reviews worldwide so you can be assured you are purchasing a quality product.

140 pages, and more than 140 illustrations and charts, size 8.25 x 10.75 inches. The original Norton factory "Twin Cylinder" workshop manual contained maintenance and repair data for both the lightweight and heavyweight Norton twins manufactured between 1960 and 1968, including the 750cc Atlas model, which was in production from 1962-1968. As many of the mechanical attributes from the Atlas series were carried over into the early Norton Commando models, we felt that the original "Twin Cylinder" manual was somewhat lacking as it did not include repair data for the early Commando that evolved from the Atlas. Consequently, we have updated and expanded this Floyd Clymer edition of the original "Twin Cylinder" manual to include the OEM Norton manual (part no. 06-3062) for the 1968-1970 Commando 750cc models that were fitted with the Atlas style exhaust and external rev-counter drive to the timing cover (Beginning with engine no. 126125 - February 1968) and the early camshaft driven contact breaker models (from engine no. 131257 - March 1969). While there is some duplication between the Atlas and Commando repair information, we felt that the Commando manual should be included in its entirety in order to 'complete' the coverage of the original "Twin Cylinder" manual from 1960 through the 1970 model year. It should also be noted that this manual includes significant maintenance and repair information for the AMC Norton/Matchless G15 hybrids that were manufactured from 1963-1967, engine numbers 107388 to 124371.IMPORTANT NOTE: Many of the reprints found on internet websites are from 'bedroom sellers' at enticingly low prices by individuals that really have no idea what they are selling. Many are nothing more than poor quality comb bound photocopies that are scanned and published complete with greasy pages and thumbprints and, as such, are deceptively described as 'pre-owned'. In addition, they are often advertised for the incorrect series and/or model years of motorcycles. However, VelocePress.com has been publishing licensed reprints of motorcycle and automobile manuals since 2003 and our publications have earned excellent reviews worldwide so you can be assured you are purchasing a quality product.We are pleased to offer this combined reprint of the Factory "Twin Cylinder" and "Commando" (06-3062) Workshop manuals. Models covered are: Lightweight Models: Jubilee 250cc (1960-1966) Navigator 350cc (1961-1965) Electra 400cc (1963-1965).Heavyweight Models: Model 88 500cc (1960-1966) Model 99 600cc (1960-1962) 650SS 650cc (1962-1968)Atlas 750cc (1962-1968) G15 750cc (1963-1967 AMC Norton/Matchless Hybrid)Commando 750cc (1968-1970 models only) IMPORTANT: Please note that the 750cc Commando manual is only applicable to the 1968-1970 models. Owners of later Commando models are directed to our 1970-1975 manual (ISBN 9781588502438) and MKIII owners to our 1975-1978 manual (ISBN 9781588502445).

With 340 pages, and more than 500 illustrations and charts, size 8.25 x 10.75 inches, this is possibly the most complete workshop manual for the Alfa Romeo 750 & 101 series of automobiles. It includes: A reprint of the September 1958 factory Workshop Manual (No.637). The 12-page 'Transmission Appendix' from the December 1957 manual (No.611). The 15-page 1962 'Enclosure to the Shop Manual-Technical Characteristics' (No.854) plus the 1963 and 1964 'Technical Characteristics' publications for the 1600cc models (27 pages). Introduced in 1954, the initial 750 Series Giulietta was replaced by the 101 Series Giulietta in 1959. Both the 750 and 101 models were powered by a 1300cc (1290cc) engine. The engine capacity was increased in 1962 with the introduction of a 1600cc (1570cc) unit. Co-incident with this engine update, the Giulietta name was changed to Giulia, although they still retained their original 101 Series designation. From 1962 onwards, the updated Giulietta continued to be sold under the Giulia name until they were replaced by the all-new 105 Series Giulia-based models in 1965. As the predominance of the basic mechanical components of the 750 and 101 models remained unchanged during their 1954-1965 production run, the original Giulietta workshop manual was considered adequate and the factory supplemented it with the publication of 'Technical Characteristics' booklets (1963 & 1964) that updated the Factory manual with technical data specific to the 1600cc equipped cars. Timeline of the English language manuals issued by the Alfa factory for the 750 & 101 Series Giulietta and Giulia models: The first English language Workshop Manual (Part No.577 - 600 copies) was issued in May 1957 and it consisted of 14 individual booklets in a ring binder. In addition, a separate booklet numbered 15 was added a little later that was identified as 'Special Repair Data for the 'Sprint Veloce, Spider and Super Spider'.In December 1957, Alfa issued 1000 copies of a softbound workshop manual (Part No.611) that combined the booklets from the May 1957 publication into a single volume. It should be noted that booklet 14 'Special Tools and Equipment' was omitted from this edition and that the images are of poor quality. In September 1958, another 1000 copies of a softbound single volume manual (Part No.637) was issued and the images in this manual are almost photo quality. This edition also included the previously missing 'Special Tools' section. However, for some unknown reason the 12-page appendix to the transmission section from the December 1957 edition was omitted. This same part number (637) was reprinted by the factory in September 1961 (1000 copies). Finally, in November 1962, Alfa issued 2000 copies of a 15-page booklet 'Enclosure to the Shop Manual - Technical Characteristics' (Part No.854). This booklet expanded the technical data for the 1300cc models that was previously included in 'Technical Specifications' section of both the ring bound and softbound workshop manuals. However, in 1962, the Giulietta sport models: Sprint, Sprint Special and Spider were fitted with the new 1600cc engine and the Giulietta Series 101 name was dropped but they continued to be sold under the Giulia name (as 101 Series vehicles) until they were replaced by the all-new 105 Series Giulia-based models in 1965. Consequently, for the sake of completeness, the 20-page October 1963 'Technical Characteristics' booklet (Part No. 955 -1000 copies) for the 1600cc Giulia Ti, Spider & Sprint and the 7-page October 1964 'Technical Characteristics' for the Giulia Spider Veloce should be a required addition to this list of manuals for the 750 and 101 Series models.

248 pages, 311 illustrations plus an additional 66 pages of wiring diagrams, size 8.25 x 10.75 inches. Updated from its previous format to include the later 3.2 Litre models through 1989. This Floyd Clymer publication includes complete technical data, service and maintenance information and comprehensive detailed instructions for the repair and overhaul of all major and minor mechanical and electrical components for the 1973 to 1989 Porsche 911G Series, 2.7, 3.0 and the 3.2 Litre models.In its original format, this manual covered the Porsche 911 models through the 1978 model year. However, additional information for the earlier 2.7 and 3.0 Litre models that was not available at the time the original manual was published, is now included or appended to each chapter in this revised publication. While this manual focuses on the 1973-1989 G series 911, much of the information is also applicable to the earlier 2.4 Litre (1971-73) models destined for the U.S.A., Australia, Japan and Canada that, due to emission requirements, were fitted with Bosch mechanical fuel injection (FIP). Consequently, this manual will also be of interest to owners of those 2.4 litre fuel injected models. The manual is broken down into the following sections: Engine, Fuel System including Bosch mechanical fuel injection (FIP) continuous injection (CIS) and digital fuel injection (DME). Ignition Systems including Capacitive Discharge CDS, CDI and DME, Cooling, Heating & Exhaust Emission Systems, Clutch, Manual Transmission & Sportomatic Transmission, Rear Suspension & Drive Axles, Front Suspension, Steering, Brakes, Electrical System and Body. There is also an appendix to the rear of the manual that includes Technical Specifications and Wiring Diagrams. While reprints of the factory manual are readily available, they are relatively expensive, and we are pleased to be able to offer this reasonably priced alternative as a service to all 1973-1989 Porsche 911 enthusiasts worldwide.

Alfa Romeo never published an 'all inclusive' manual for the SPICA Fuel Injection system and detailed information can only be found in their individual 'Technical' publications. This manual is a compilation of six of those factory publications, it includes the only information ever issued by Alfa Romeo for the SPICA fuel injection system.

Revised and updated to a larger format than the original, this Floyd Clymer publication includes complete technical data, service and maintenance information and comprehensive detailed instructions for the repair and overhaul of all mechanical and electrical components for the 1964 to 1973 Porsche 911 series.

348 pages, with more than 200 illustrations and charts, size 5.5 x 8.5 inches. Originally published under the same title by Floyd Clymer in 1961 this revised edition was republished in 2015 by VelocePress. Written in easy to understand language, this is possibly the most user-friendly and comprehensive owner's workshop manual ever published for first generation 283 cu. in. V8 powered Corvettes. There are detailed instructions for the overhaul, service and maintenance of the major mechanical and electrical components. A section on RPO's identifies each option by part number, and their installation and effects on performance are discussed. In addition, there is a comprehensive section on the various fuel injection systems fitted to this series of Corvettes. Finally, there is a section on 'Increasing Power and Performance'. The reproduction of a factory handbook included in the original Clymer publication has been omitted due to the fact that there were numerous variations of the official Chevrolet handbook that were issued during the production run of this series of Corvettes. Therefore, it is recommended that this manual be used in conjunction with the 'Owners Handbook' that was issued with your automobile. Also, the 1960 AMA specifications have likewise been omitted as they are no longer relevant. Out-of-print and unavailable for many years, this book is becoming increasingly more difficult to find on the secondary market and we are pleased to be able to offer this reproduction as a service to all first generation Corvette owners, restorers and enthusiasts worldwide.

344 pages, with more than 200 illustrations and charts, size 5.5 x 8.5 inches. Originally published under the title 'Sprite and Midget Owner's Manual and Service Manual' by Floyd Clymer just prior to his untimely death in 1970, this revised and updated edition was republished in 2015 by VelocePress. Written in easy to understand language, this is possibly the most user-friendly and comprehensive owner's workshop manual ever published for the 948cc, 1098cc and 1275cc series of Austin-Healey Sprites and MG Midgets. The contents of the original Clymer manual have now been reformatted into three separate sections appropriate to the three different engines that were used in this series of automobiles between 1958 through 1971. There is an engine/chassis 'Model Identification Chart' followed by a 'General Data' section that includes complete technical specifications for each model listed within the 'Model Identification Chart'. There are detailed instructions for the overhaul, service and maintenance of the major mechanical and electrical components for the 948cc, 1098cc and 1275cc engines. In addition, the 1275cc engine section includes comprehensive emission control information and test data. There are also additional wiring diagrams that were not included in the original 1970 publication. Finally, there is a section on 'Increasing Power and Performance' that also includes detailed step-by-step instructions and illustrations for the installation of a Judson Supercharger. The reproduction of a factory handbook included in the original Clymer publication has been omitted due to the fact that there were numerous variations of the official BMC handbook that were issued during the production run of this series of automobiles. Therefore, it is recommended that this manual be used in conjunction with the 'Owners Handbook' that was issued with your automobile. Out-of-print and unavailable for many years, this book is becoming increasingly more difficult to find on the secondary market and we are pleased to be able to offer this reproduction as a service to all 'Spridget' owners, restorers and enthusiasts worldwide.

218 pages, 200 illustrations, size 5.5 x 8.5 inches. Originally published in the USA under the same title in 1961 by Floyd Clymer, this is a faithful reproduction of the original. This is not a step-by-step restoration manual; it is more a compilation of significant data that would be a critical part of the restoration process. It includes 45 pages of official Ford service bulletins plus complete technical data, body and chassis dimensions, paint and interior colors, specifications, maintenance and repair information - all of which would be of assistance in the restoration, repair, overhaul and maintenance of the MODEL A Ford automobile. This is a 'must have' reference for any MODEL A enthusiast and would certainly assist in helping any potential purchaser better understand the inner workings prior to purchasing one of these classic automobiles. This truly historical document of the glory years of Ford has been out-of-print for many years. We are pleased to be able to offer this reproduction as a service to all MODEL A enthusiasts worldwide.

Originally published by Floyd Clymer this is a faithful reproduction of the 1967 publication of that manual. Includes complete technical data, service and maintenance information and comprehensive detailed instructions for the repair and overhaul of all major and minor mechanical and electrical components. Covers the Porsche 356-356A-356B-356C series from 1948 through 1965, making it an invaluable resource for collectors and restorers of these classic automobiles. There are separate sections that deal with the repair and overhaul procedures for the engine, ignition system, fuel system, clutch, transmission, rear suspension, steering, front suspension, brakes, shocks, heater and exhaust plus a detailed electrical system section including wiring diagrams. There is a comprehensive chapter on routine service, maintenance and tune ups plus detailed technical specifications and maintenance charts. In addition, there are separate chapters dealing with the three different carburetors fitted to the 356 series - Solex, Zenith and Weber plus a chapter on the Carrera engine and special section on increasing power and performance. This is a - must have - reference for any Porsche 356 enthusiast and would certainly assist in helping any potential purchaser better understand the inner workings prior purchasing of one of these classic automobiles. Out-of-print and unavailable for many years, this book is becoming increasingly more difficult to find on the secondary market and we are pleased to be able to offer this reproduction as a service to all Porsche enthusiasts worldwide.

206 pages and more than 180 illustrations and charts, size 8.25 x 10.75 inches. This Workshop Manual is appropriate for the entire line of 1952 through 1963 Royal Enfield 700cc models. It will also be of use to owners of the 700cc USA (only) Interceptor and the Enfield Indian 700cc Apache, Trailblazer and Chief. A compilation of two factory manuals, it includes the original 1955 'Meteor 700' workshop manual for the 1952 to 1955 models and the later workshop manual for the 1955 to 1963 'Super Meteor' and 'Constellation'. PRODUCTION DETAILS: Due to a number of different reasons, there is some confusion surrounding production details, as it is a known fact that the engine and frame numbering procedure did not follow a consistent pattern and, at times, was somewhat random.As the 'Meteor 700' shared many of its mechanical components with the '500 Twin', the earlier manual is appropriate for both of these models. Royal Enfield was very adept at utilizing components across their entire model line and this 'sharing' carried over into their workshop manuals. Consequently, many of the sections and illustrations are identified as being appropriate for various models and not necessarily specific to the particular model referenced in the manual title. The second manual is much more specific to the 'Super Meteor' and 'Constellation' models and the only noticeable 'shared' pages are the carburetter settings table and the lighting, frame and special tools sections. In order to help identify the subtle differences between the various models, the reader is encouraged to review any of the appropriate sections in order to eliminate the possibility of referencing an incorrect 'shared' section.

302 pages, and more than 135 illustrations and charts, size 8.25 x 10.75 inches. This manual is a compilation of 7 Norton factory publications specific to the 1945-1963 single-cylinder S.V. and O.H.V. 16H, Big4, 18, ES2, 19R, 19S & 50 models.Workshop Manuals included are: (1) pages extracted from the 16H WD manual dealing with the maintenance and overhaul of girder forks as they are appropriate to the 1945-1946 models (2) a compilation of both the 1947 and 1956 16H, Big 4, 18 and ES2 workshop manuals for the S.V. and O.H.V. 'Road-holder' forks, spring frame (plunger) models (3) a 1956 manual for the O.H.V. swing-arm 19S, ES2 & 50 models and (4) pages extracted from the 1970 manual that are appropriate for the 1958-1963 ES2 & 50.Illustrated Parts Lists included are: (5) a 1948-1949 parts list for the 'Road-holder' forks, spring frame (plunger) 16H, Big4, 18 & ES2 (this parts list also includes the 1946-1949 30, 40, 30M & 40M) (6) a 1956 parts list for the swing-arm ES2, 19S & 50 and the rigid frame 19R and (7) a 1959 parts list for the ES2 &50 (this parts list also includes the 88 & 99 twins).A GUIDE TO THE POSTWAR 1945 THROUGH 1963 NORTON WORKSHOP MANUALS AND PARTS LISTS FOR THE SINGLE CYLINDER 16H, Big 4, 18, 19R, 19S, 50 & ES2.After the war ended in 1945, Norton resumed production of their civilian line of motorcycles and they also began publishing appropriate workshop manuals and parts lists. Unfortunately, there were numerous 'editions' of these publications and, while they identified the models they covered, the workshop manuals rarely identified the years they covered. Ultimately, this can lead to confusion regarding the selection of the appropriate publication for a particular year of Norton motorcycle.WORKSHOP MANUALS: Those published from 1945 up through 1960 were normally exclusive to a specific model. However, beginning in the 1960's, a series of workshop manuals were published that combined the data for both the single and twin cylinder models. Starting with part number P101, followed by P106 and finally P106/P this series of manuals was updated at various times through 1970, however, they continued to include the ES2 and 50 singles. When the 250cc Jubilee twin was introduced in 1958, the earlier 'P' series 'combination' workshop manuals were 'superseded' by the publication of a 1960-1970 factory 'Lightweight & Heavyweight Twins' manual, obviously, the single cylinder machines were no longer included. Owners of the single cylinder models may also find our 'Book of the Norton 1932-1947' (ISBN 9781588501288), 'Book of the Norton 1938-1956' (ISBN 9781588502063) and 'Book of the Norton 1955-1963' (ISBN 9781588501196) to be of interest.IMPORTANT NOTE: Many of the reprints found on internet websites are from 'bedroom sellers' at enticingly low prices by individuals that really have no idea what they are selling. Many are nothing more than poor quality comb bound photocopies that are scanned and published complete with greasy pages and thumbprints and, as such, are deceptively described as 'pre-owned'. In addition, they are often advertised for the incorrect series and/or model years of motorcycles. However, VelocePress.com has been publishing reprints of motorcycle and automobile manuals since 2003 and our publications have earned excellent reviews worldwide so you can be assured you are purchasing a quality product.

226 pages, and more than 90 illustrations and charts, size 8.25 x 10.75 inches. This manual is a compilation of 5 factory publications exclusive to the 500, 600 and 650cc Norton Dominator series that began with the introduction of the 500cc Model 7 in 1949 and ended with the 650cc Mercury in 1970.Workshop Manuals included are: (1) a 1949-1955 Model 7 workshop manual that includes the spring frame (plunger) rear suspension models. (2) a 1956-1970 workshop manual compiled from the appropriate pages extracted from the 1970 Norton factory workshop manual, part number P106/P, for the 88, 99, 650 and 'Sports Specials' - it is also appropriate for the 650cc Manxman and Mercury models.Illustrated Parts Lists included are: (3) a 1949-1950 parts list for the model 7 that includes spring frame (plunger) rear suspension. (4) a 1957 parts list for the 77, 88 & 99 and (5) a 1964 parts list for the 88SS, 650SS and the 650/99. However, as the 750cc machines ran concurrently with the final Dominator models, the Atlas and AMC variants are also included in this 1964 parts list.Please Note: The compilation workshop manual is specific to the Dominator series which ended in 1970. It does not include repair data for the 750cc Atlas or the AMC variants (see IMPORTANT NOTE Below). A GUIDE TO THE 1947 THROUGH 1970 NORTON WORKSHOP MANUALS AND PARTS LISTS FOR THE MODEL 7, 77, 88, 99, 650 AND VARIANTSAfter the war ended in 1945, Norton resumed production of their civilian line of motorcycles and they also began publishing appropriate workshop manuals and parts lists. Unfortunately, there were numerous 'editions' of those publications and they rarely stated the years they covered. Ultimately, this can lead to confusion regarding the selection of an appropriate publication for a particular year of Norton motorcycle.

170 pages and more than 450 illustrations and charts, size 8.25 x 10.75 inches. This workshop manual is a compilation of 4 original Honda publications. It includes a reproduction of the original 250cc and 360cc twin cylinder 1974 factory workshop manual for both the disc brake and drum brake models, plus 3 factory supplements that cover both the 5 and 6 speed variants, which extends the coverage of the original manual through 1977. The models covered are: CB250, CJ250T, CB360, CL360, CB360T and CJ360T.Many of the earlier Honda motorcycle models were often introduced at different times and in different countries using different model names or designations. For example, the CB 250 was predominantly sold in the European market and not officially available in the USA. However, the 360cc models were available in both Europe and the USA.Unfortunately, this often leads to difficulty in selecting the correct workshop manual and owners of this series of 250cc and 360cc twins are subjected to considerable confusion surrounding the appropriate selection from the multitude of OEM publications that have recently flooded the on-line marketplace. This confusion is compounded by the fact that Honda used both 5 and 6 speed transmissions within the 1974 to 1977 production run of the 250/360 series. Owners of the 1968-1973 twin cylinder 5-speed 250cc and 350cc models are directed to our Honda factory workshop manual, ISBN 9781588502612. Owners of the 1961-1968 twin cylinder 250cc and 305cc C72 & C77 series will require our Honda factory workshop manual, ISBN 9781588500731.Finally, please note that the text in the original Honda Factory Workshop Manual was translated from Japanese into English. Consequently, some of the phrasing, grammar, punctuation and word usage may be subtly different from that commonly used in the English language. However the information, as presented, is readily understandable. In addition, while we have done our best to identify any anomalies, errors and incorrect spelling that may have occurred during the original translation process, we are certain that we will have missed one or two and we request your indulgence in ignoring them.

282 pages and more than 180 illustrations and charts, size 8.25 x 10.75 inches. This publication is a reproduction of the final 7th Edition (October 1965) Ariel Leader and Arrow factory workshop manual plus the March 1961 factory illustrated parts list (TCP/1361) for both models.Introduced in July 1958, the fully enclosed 250cc two-stroke twin Ariel Leader was the first British motorcycle to have flashing turn signals available as an option. In 1960, it was joined by the Arrow, a sportier version that was based on the same mechanical design but dispensed with most of the enclosure of the Leader. 1961 saw the introduction of the 'Super Sports' or 'Golden' Arrow The final Arrow model was the 200cc Arrow (1964) which benefited from lower UK insurance premiums. Production of the original 'standard' Arrow ended in 1964 and the remaining models continued on until August 1965 (as 1966 models) at which time Ariel made the decision to halt production.VelocePress.com has been publishing reprints of motorcycle and automobile manuals since 2003 and our publications have earned excellent reviews worldwide so you can be assured you are purchasing a quality product. We encourage you to exercise caution when purchasing a manual for your motorcycle as many of the reprints found on internet websites are from 'bedroom sellers' at enticingly low prices by individuals that really have no idea what they are selling. Many are nothing more than poor quality comb-bound photocopies that are scanned and printed complete with greasy pages and thumbprints and, as such, are deceptively described as 'pre-owned', 'used' or even 'refurbished'! In addition, they are often advertised for the incorrect series and/or model years.With more than 250 titles in print VelocePress is one of the fastest growing specialty automobile and motorcycle publishing companies in the USA. Please visit our website at www.VelocePress.com for more information on our company and our books.

196 pages and more than 83 illustrations and charts, size 8.25 x 10.75 inches. This publication is a reproduction of two original Velocette Factory Manuals, the October 1955 service manual, part number F50/7R and the March 1958 illustrated parts manual, part number F132/11R. The parts manual is invaluable as it details changes in construction by engine number and/or model year. The original 118-page factory service manual covers the 1933-1952 range of 250cc, 350cc and 500cc rigid frame models and both the 'Iron' Cylinder Head and 'Aluminum' Head machines. It includes the 1933-1948 MOV and the 1935-1948 MSS with Webb Girder Forks and the 1934-1952 MAC. The MAC models covered are the 1934-1948 with Webb Girder Forks, the 1948-1950 with 'Dowty' Oleomatic Forks and the 1951-1952 models with 'Veloce' Telescopic Forks. In addition, a reproduction of the factory 'Service and Maintenance' manual for Dowty forks is included. The original 68 page illustrated parts manual covers both the MOV and MAC models listed above. It also includes diagrams and parts listings for the Webb, Dowty and Velocette forks. The 350cc MAC is possibly the most popular Velocette model ever built. It evolved from the 250cc MOV by lengthening the stroke of the MOV crankshaft from 68.25 to 96 mm. From 1933-1939 the MAC was constructed with a rigid frame fitted with Webb girder forks. From 1940-1941 a version of the MAC was the basis for the company's World War II military motorcycles. The Military models were MDD and MAF (Factory Dispatch Records state 1320 were produced). In 1946, after the war, MAC civilian production restarted, and in 1948 the MAC's Webb girder forks were replaced with innovative air-sprung oil dampened 'Dowty Oleomatic' forks. In 1951, the Dowty forks were replaced by Veloce 'telescopic forks', with coil springs and oil damping. In June of that same year the engine was upgraded to an aluminum barrel and head with wider fins to improve cooling. For 1953, the MAC was updated with fully adjustable rear swinging arm suspension and a tube frame. Production of the rigid frame MAC ended in 1952 swing arm production ended in 1960. Based on the factory part numbers there were approximately 20 service and parts manuals published during the 20-year production run of the rigid frame machines. However, the print quality of the later factory manuals was not the best, as the same pages or sections from earlier publications were re-printed multiple times as the newer manuals were published. Unfortunately, this created problems in print quality and print density in those later manuals resulting in both light and heavy print on the same page. While we have done our best to correct as many of those imperfections as possible there are some occurrences that just could not be corrected. Therefore, we request your indulgence in tolerating any variations that still exist and accept that the intention in reproducing these manuals was to provide the reader with information that would assist in the renovation and maintenance of these classic Velocette motorcycles.

174 pages with 145 illustrations, diagrams and charts, size 6-5/8 x 10-1/4 inches. This is a publication for those Ferrari enthusiasts that are tired of oversized and often overpriced coffee table books filled with page after page of photos of red Ferrari's and not much else.This book contains all the technical data and statistics for the majority of the 1948 to 1958 Ferrari road and race cars. It was compiled by a knowledgeable author who lived in Modena at the time that these cars were being constructed, who was personally acquainted with Enzo Ferrari and had access to the factory documents during that time period. It includes the author's road test experiences, technical specifications, tune up, adjustments, maintenance and repair information, detailed technical drawings, exploded views, wiring diagrams and lubrication charts. This book is a 'must have' for any Ferrari enthusiast or lucky owner of one of these early cars and should be in the library of any true Ferraristi. Originally published by Floyd Clymer in 1960 under the similar title of 'The Ferrari Owner's Handbook', its description left much to be desired. For example, of the 174 pages there are 90 pages that are much closer to a repair and maintenance manual. Consequently, it's more of a technical manual than a handbook.There are seven sections that cover both the road and race cars constructed by Ferrari from 1948 to 1958. Section 1 - The authors driving experiences of the Type 166, Type 342 and 340 America and Type 375 America.Section 2 - Specifications for 41 road and race cars constructed by Ferrari from 1948 to 1958. Section 3 - Repair, Maintenance and tune up information.Section 5 - Valve Timing and Carburetor data.Section 6 - Acceleration times.Section 7 - Detailed component drawings, exploded views, Wiring Diagrams, Lube charts etc.