Utvidet returrett til 31. januar 2024

Bøker i What Every Engineer Should Know-serien

Filter
Filter
Sorter etterSorter Serierekkefølge
  • - The Guide to Building and Growing a Green and Clean Business
    av Eric Koester
    865,-

    Although opportunities abound in the 'Green Sector', anyone planning on entering this sector cannot not leap first and look later. This book provides 'must-know' information for those building a green business. It addresses macro issues in the green movement and key considerations for starting a green business.

  • av Adrian B. Biran
    2 404,-

    Using examples from mathematics, mechanical and electrical engineering, and control and signal processing, this book provides an introduction to MATLAB[registered] and Simulink and examines the advantages and limitations of both.

  • - The Guide to Building and Growing a Green and Clean Business
    av Eric Koester
    2 404,-

    Although opportunities abound in the 'Green Sector', anyone planning on entering this sector cannot not leap first and look later. This book provides 'must-know' information for those building a green business. It addresses macro issues in the green movement and key considerations for starting a green business.

  • av Mike (Silver Springs Ficco
    2 541,-

    Various engineers fail to notice critical issues in the workplace that can directly impact their career advancement and job satisfaction. This text focuses on career management, and the importance of human interactions in the office. It provides observations on "people skills" relevant to various occupations.

  • av Eric (General Counsel Koester
    2 473,-

    Explores the options to capitalize a business - from self-funding, to bootstrapping, to angel investors, to venture capital to government grants, to bank loans, to joint ventures. This title looks at the best ways to form a company so as to take advantage of various tax and business strategies. It explains how a company can expand internationally.

  • av John X. (Lean Six Sigma Institute of Technology Wang
    2 473,-

    Demonstrates how to integrate marketing strategy into various facets of engineering communication from presentations, visual aids, proposals and technical reports to e-mail and phone calls. This book also provides situational examples, which demonstrate how to use computers, graphics, and other engineering tools to communicate with engineers.

  • av Eugene (Purdue University Northwest (Hammond campus) Schlossberger
    700 - 1 982,-

  • av Mohamad Kassab & Phillip A. (The Pennsylvania State University Laplante
    623 - 1 824,-

  • av Mohamad Kassab, Malvern, USA) DeFranco & m.fl.
    700 - 2 079,-

  • - Materials and Design
    av Alexander Blake
    814,-

    This book is designed to serve the needs of engineers, technicians, designers, and technologists concerned with standards, materials, design, and elementary formulas for the selection, procurement, and quality control of threaded fasteners.

  • av Raymond J. (Naval Postgraduate School Madachy
    2 061,-

  • av Thomas A. Salomone
    1 335,-

    Offers an approach to the overall concurrent engineering development process, presenting both fundamental principles and advanced concepts, while focusing on rapid product development and cost-effective designs. This book introduces Cost Driven Design, with specific examples on how to minimize expenses by understanding the basis of product costs.

  • av Norman (The Pennsylvania State University Henteleff
    1 332,-

    Presents the fundamental finance and accounting processes, methods, strategies and terminology necessary for engineers and engineering managers to interpret financial data properly - examining topics such as cost and break-even analysis, the time value of money, financial ratios and discounted cash flow techniques.

  • av William H. Middendorf
    648,-

    This book provides the reader with the information they need to develop into a person who seeks creative opportunities and responds with elegant inventions. It is intended for young inventor and to all those who have the talent and the desire to invent.

  • - Materials and Design
    av Alexander Blake
    1 744,-

    This book is designed to serve the needs of engineers, technicians, designers, and technologists concerned with standards, materials, design, and elementary formulas for the selection, procurement, and quality control of threaded fasteners.

  • av Blake K. Holman
    809 - 2 030,-

  • av Carl Stephen Clifton
    1 273,-

    This book discusses the fundamentals of data communications, the most important element in an engineer's daily function. It examines the technologies and methodologies now available in the marketplace to effect the exchange of information.

  • av Keith A. Wehmeyer
    445,-

    This book covers the entire scope of computer programming and Structured Program Design, from problem identification to maintaining existing programs. It is intended for two audiences: beginning programmers and experienced programmers seeking ways to improve the quality of their software.

  • av Maurice I. Zeldman
    1 273,-

    This book summarizes the technology and economics of robotics. It aims to provide sufficient data background so that the technologists can help in deciding about a corporate investment in robotics.

  • av Adrian B. Biran
    1 082,-

    Using examples from mathematics, mechanical and electrical engineering, and control and signal processing, this book provides an introduction to MATLAB[registered] and Simulink and examines the advantages and limitations of both.

  • av Kenneth K. (Consultant Humphreys
    1 856,-

    Explains the engineering profession's codes of ethics using case studies drawn from decisions of the "National Society of Professional Engineers' Board of Ethical Review", examining ethical challenges in engineering, construction, and project management. This title considers the merits and drawbacks of professional codes of ethics.

  • av Eric (General Counsel Koester
    992,-

    Explores the options to capitalize a business - from self-funding, to bootstrapping, to angel investors, to venture capital to government grants, to bank loans, to joint ventures. This title looks at the best ways to form a company so as to take advantage of various tax and business strategies. It explains how a company can expand internationally.

  • av John X. (Lean Six Sigma Institute of Technology Wang
    814,-

    Demonstrates how to integrate marketing strategy into various facets of engineering communication from presentations, visual aids, proposals and technical reports to e-mail and phone calls. This book also provides situational examples, which demonstrate how to use computers, graphics, and other engineering tools to communicate with engineers.

  • av Don M. Ingels
    1 410,-

    This book presents a brief description of what constitutes computer modeling and simulation with techniques given to get a feel for how some of the simulation software packages involving hundreds of thousands of lines of code were developed.

  • av John Stark
    1 783,-

    This book presents basic information on CAD/CAM and describes how to select, implement, and run a CAD/CAM system in the mechanical engineering environment. It also describes the overall state of CAD/CAM today in different industrial sectors and for different manufacturing technologies.

  • av Mike (Silver Springs Ficco
    855,-

    Various engineers fail to notice critical issues in the workplace that can directly impact their career advancement and job satisfaction. This text focuses on career management, and the importance of human interactions in the office. It provides observations on "people skills" relevant to various occupations.

  • av Raymond J. (Naval Postgraduate School Madachy
    809,-

    The book covers applying modeling and simulation to engineering problems, modeling purposes, scoping a model, levels of modeling abstraction, benefits and cost of including randomness, types of simulation, and statistical techniques. No prior experience is needed. It shows how to conduct a M/S project and how to work with simulation experts.

  • - Hardware/Software Design: a Step-by-step Example, Second Edition,
    av William S. Bennett
    946,-

    Demonstrates microcomputer usage by working through one simple design challenge and explaining its solution. This title features the contributions of an Ada expert, demonstrates (in 14 chapters) the development of a microcomputer system structured by this language.

  • av William G. Konold
    1 082,-

    Focuses on various aspects of intellectual property law with emphasis on patent laws. This book enables the reader to avoid such pitfalls as a loss of rights, and establish valid rights in inventions, trademarks, and writings.

Gjør som tusenvis av andre bokelskere

Abonner på vårt nyhetsbrev og få rabatter og inspirasjon til din neste leseopplevelse.